DSC PC1575 Bedienungsanleitung PDF herunterladen (Seite 6)

down

look

DSC 8400

with

DLM-4 and DLM-7

DSC8400 DL Digital Communicator

The DSC8400 DL Digital Communicator allows the Downlook System to be connected to an

existing Alarm Control Panel or to be used as a stand alone unit. The control panel may be an

existing DSC product not specifically designed for use with Downlook, or it may be an alarm

system from another manufacturer.

The DSC8400 DL is an 8-channel communicator with Normally-Open or Normally-Closed Trigger

Inputs. Downlook information is programmed directly into the DSC8400 DL along with account

and alarm information using a DSC PC2550RK keypad.

Other alarm panels will be able to activate the DSC8400 DL from outputs, such as bells or

sirens. When interconnecting with another control panel, it is recommended that a separate

telephone line be used for the Downlook transmissions; this will prevent communication clashes

between the control panel’s alarm reporting and Downlook communication.

DLM-7 Camera Selection Module

The DLM-7 connects to the DLM-4 Downlook Module to add multiple-camera operation to a

Downlook system. The DLM-7 allows up to 7 cameras to be installed on the premises. As

alarms are generated, the DLM-7 will activate the camera assigned to the zone in alarm and the

DLM-4 will begin to capture video images.

The DLM-7 does not require a power supply; a simple connection links the unit to the DLM-4,

and camera connections are made using standard BNC connectors.

PS-3085

The PS3085 is a 3 Amp 12VDC power supply designed for use with the DSC8400 DL. The

PS3085 requires a 16VAC transformer. The PS3085 features:

• AC Failure Detection

• AC Failure Output

• Low Battery Detection

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

DSC PC1575 Bedienungsanleitung Seite 6