DSC PC 5010 Installationshandbuch PDF herunterladen (Seite 18)

3.5 Viewing Programming

LED and LCD5501Z Keypads

Any programming section can be viewed from an LED or

LCD5501Z keypad. When a programming section is

entered, the keypad will immediately display the first

digit of information programmed in that section.

The keypad displays the information using a binary for-

mat, according to the following chart:

See Hex data

entry instructions

Press any of the Emergency keys (Fire, Auxiliary or Panic)

to advance to the next digit.

When all the digits in a section have been viewed, the

panel will exit the section: the Ready light will turn OFF,

and the Armed light will turn ON, waiting for the next

three-digit programming section number to be entered.

Press the [#] key to exit the section

LCD Keypad

When a programming section is entered, the keypad will

immediately display all the information programmed in

that section. Use the arrow keys (< >) to scroll through the

data being displayed. To exit the section, scroll past the

end of the data displayed, or press the [#] key.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 59 60

Keine Kommentare

DSC PC 5010 Installationshandbuch Seite 18