DSC PowerSeries Self Contained Wireless Alarm System Installationsanleitung

Installation GuideSelf Contained Wireless Alarm System v1.0WARNING: This manual contains information on limitations regarding product use and function

Self Contained Wireless Alarm System v1.06Place wireless detectors in the desired locations and perform the wireless placement test.Reposition devices

Section 3: Template Programming7Section 3: Template ProgrammingTemplate programming allows the Installer to quickly program the minimum functions requ

Self Contained Wireless Alarm System v1.08• Digit 3 selects 1 of the 8 following options• Common Group - Sets all Reporting Codes to Automatic• Selec

Section 3: Template Programming9• Installer Lead-in/Lead-out and DLS Lead-in/Lead-outDigit 4 indicates/selects 1 of the 3 following DLS ConnectionsAft

Self Contained Wireless Alarm System v1.010Section 4: DLS Programming4.1 Local Programming with PC-LinkFollow the steps below in the sequence indicate

Section 5: Operation11Section 5: OperationThe LCD keypad displays the description and status indicator lights represent alarm functions and status. Th

Self Contained Wireless Alarm System v1.012[][2] – Trouble DisplayRefer to Appendix E: Troubleshooting Guide, for troubleshooting assistance and a de

Section 5: Operation13Additional Keypad Functions:When scrolling through the list of available functions, the following additional functions are avail

Self Contained Wireless Alarm System v1.014Section 6: Advanced ProgrammingThis section provides the information necessary to program all required feat

Section 7: Programming Work Sheets15Section 7: Programming Work Sheets7.1 Index to Programming Work Sheets and Descriptions Programming Option...

SAFETY INSTRUCTIONS for SERVICE PERSONNELWARNING: When using equipment connected to the TELEPHONE NETWORK, there are basic safety instructionsthat sho

Self Contained Wireless Alarm System v1.0167.2 Programming WorksheetsKeypad and Function Key Programming[000] Function Key Programming [1] Function Ke

7.2 Programming Worksheets17[005] System Times [009] I/O Programming [012] Keypad Lockout Options [013] First System OptionsValid entries for Entry D

Self Contained Wireless Alarm System v1.018[014] Second System Options[015] Third System Options[016] Fourth System Options[023] Tenth System Options

7.2 Programming Worksheets19[030] Zone Loop Response Options[101]-[134] Zone Attributes (Options 10-13 are reserved for Future Use).Zone Attribute Def

Self Contained Wireless Alarm System v1.020Daylight Saving Time[170] PGM Output Timer Default 005 I_______I_______I_______I Valid entries are 001-255

7.2 Programming Worksheets21Reporting Codes[320]-[322] Alarm Reporting Codes, Zones 01-34Section[320] Zone 01 Zone 02 Zone 03 Zone 04 Zone 05 Zone 0

Self Contained Wireless Alarm System v1.022[330]-[332] Tamper Reporting Codes, Zones 01-34 Section[330] Zone 01 Zone 02 Zone 03 Zone 04 Zone 05 Zone

7.2 Programming Worksheets23[350] Communicator Format Options Default04 I_______I_______I First Telephone Number04I_______I_______I Second Telephone N

Self Contained Wireless Alarm System v1.024[375] System Maintenance Communicator Call Directions [376] System Test Transmissions Communicator Call Dir

7.2 Programming Worksheets25[381] Second Communicator Options[382] Third Communicator Options*This option must remain OFF for SIA-FAR installations.**

Table of ContentsSection Description Page11.11.2Installation & Wiring...

Self Contained Wireless Alarm System v1.026[406] Number of Rings To Answer On Default 000 I_______I_______I_______I Valid entries are 000-009, (000 to

7.2 Programming Worksheets27[600] 2-way Audio Control Options (Applies to SCW9047 only)INTERNATIONAL PROGRAMMING[700] Automatic Clock Adjust Default

Self Contained Wireless Alarm System v1.028[804] Wireless programmingWireless Zone ProgrammingZoneSubSectionSerial Number ZoneSubSectionSerial Number1

7.2 Programming Worksheets29[82]-[85] Zone Transmitter Supervision[90] General Wireless OptionsSpecial Installer Functions[898] Wireless Device Enroll

Self Contained Wireless Alarm System v1.030Local Keypad ProgrammingEnter [] when in Installer Programming to Access Keypad programming[001]-[034] Lab

7.2 Programming Worksheets31[065] Fire Alarm Label[066] Fail to Arm Event Message[067] Alarm When Armed Event Message[068] Command Output #1 Label[069

Self Contained Wireless Alarm System v1.032[074] First Keypad Options[075] Second Keypad Options[076] Third Keypad Options[077] Programmed LCD Message

Section 8: Programming Descriptions33Section 8: Programming DescriptionsThe following is a brief description of the features and options available in

Self Contained Wireless Alarm System v1.034Section [005] System TimesAfter entering Section [005], program the Entry Delay 1, Entry Delay 2 and Exit D

Section 8: Programming Descriptions35 Section [013] First System OptionsSection [014] Second System OptionsSection [015] Third System OptionsOption De

WWW.DIYALARMFORUM.COM

Self Contained Wireless Alarm System v1.036Section [016] Fourth System OptionsSection [023] Tenth System Options [8] ON: System Tamper Enabled. The pa

Section 8: Programming Descriptions37Section [030] Zone Loop Response OptionsThis section is used to determine the Loop Response Time for hardwired zo

Self Contained Wireless Alarm System v1.038Section [170] PGM Output TimerProgram the time, in seconds, PGM outputs programmed to follow the PGM Output

Section 8: Programming Descriptions39Section [377] Communicator VariablesProgram a 3-digit number for each program entry:Section [378] Test Transmissi

Self Contained Wireless Alarm System v1.040Section [381] Second Communicator OptionsSection [382] Third Communicator OptionsSection [401] First Downlo

Section 8: Programming Descriptions41Section [402] Downloading Computer Phone NumberThe Downloading Computer Telephone Number is used for Call Back an

Self Contained Wireless Alarm System v1.042Section [600] 2-way Audio Control Options (applies to SCW9047 only) Section [700] Automatic Clock AdjustPro

Section 8: Programming Descriptions43Section [701] First International OptionsSection [702] Second International OptionsSection [703] Delay Between Di

Self Contained Wireless Alarm System v1.044Sub Section [82]-[85] Wireless Zone Supervision (Zones 1 - 32)Programming these sections determines whether

Section 8: Programming Descriptions45Keypad Programming To access Keypad Programming enter [][8][Installer’s Code][].To return to System Programming

Section 1: Installation & Wiring1Section 1: Installation & WiringThis Installation Guide provides the basic installation, wiring and programmi

Self Contained Wireless Alarm System v1.046Section [074] First Keypad OptionsSection [075] Second Keypad OptionsOption Description [1]Future Use [2]ON

Section 8: Programming Descriptions47Section [076] Third Keypad OptionsSection [077] Programmed LCD MessageEnter a 32 character message. If there is a

Self Contained Wireless Alarm System v1.048Section 9: Testing & TroubleshootingTesting:• Power up system• Program options as required (See Program

Section 9: Testing & Troubleshooting49Trouble [4] Failure to CommunicatePanel fails to communicate one or more events to central stationConnect a

Self Contained Wireless Alarm System v1.050Appendix A: Reporting Code FormatsThe following tables contain Contact ID and Automatic SIA format reportin

Appendix A: Reporting Code Formats51[347] Installer Lead In Installer’s mode has been entered MA/R (6)27 LB-00[347] Installer Lead Out Installer’s mod

Self Contained Wireless Alarm System v1.052Appendix B: Communicator Format OptionsThe following format options are programmable in section [350] on pa

Appendix B: Communicator Format Options5304 SIA FSK• SIA -0 is valid in Account or Rep Code (not 00 in a Reporting code though)• This format uses 300

Self Contained Wireless Alarm System v1.054Appendix C: Regulatory Approvals InformationNorth America This product has been tested and found in complia

Appendix C: Regulatory Approvals Information55SIA False Alarm Reduction InstallationsFor a list of the defaults value programmed when the unit is ship

Self Contained Wireless Alarm System v1.021.1 Installation:123.If required, separate the front and back covers by remov-ing the cover screw then inser

Self Contained Wireless Alarm System v1.056Appendix D: SIA False Alarm ReductionSIA FeatureProgramming SectionComments Range/Default Require-mentExit

Appendix E: 2-Way Audio Verification (SCW9047 only)57Appendix E: 2-Way Audio Verification (SCW9047 only)The following information is intended for use

Self Contained Wireless Alarm System v1.0584. Initiating, Control and Termination of the Session: The Operator controls the session the using the foll

NOTES:WWW.DIYALARMFORUM.COM

FCC COMPLIANCE STATEMENTCAUTION: Changes or modifications not expressly approved by Digital Secu-rity Controls could void your authority to use this e

1.2 Wiring31.2 Wiring1. Zone WiringZones can be wired for Normally Open, Normally Closed Contacts with Single-end-of-line (SEOL) resistors or Double E

Self Contained Wireless Alarm System v1.04 NOTE: Do not connect transformer to a receptacle controlled by a switch.For UL/ULC Installations use a Clas

Section 2: Wireless Device Enrollment5Section 2: Wireless Device EnrollmentBefore a wireless device can be recognized by the security system, it must