DSC PC1550 Technical Information PDF herunterladen

About Your Security System

Your DSC security equipment has been designed to give the greatest

possible flexibility and convenience. Read this manual carefully and have

your installer instruct you on system operation and on which features have

been implemented in your system. All users of this system should be

equally instructed in its use. Fill out the System Information page and store

this manual in a safe place for future reference.

Fire Detection

This equipment is capable of monitoring fire detection devices such as

smoke detectors and providing a warning if a fire condition is detected.

Good fire detection depends on having adequate number of detectors

placed in appropriate locations. This equipment should be installed in

accordance with applicable standards and codes. Carefully review the

Family Escape Planning guidelines in this manual.

NOTE: Your installer must enable the fire detection portion of this

equipment before it becomes functional.

Testing

To insure that your system continues to functions as intended, it is

important that you test your system weekly. See the testing procedure

elsewhere in this manual. If your system does not function properly, call

your installing company for service.

General System Operation

Your security system is made up of a DSC PC1500 or PC1550 control

panel, one or more PC1500RK keypads and various sensors and detectors.

The control panel will be mounted out of the way in a utility closet or in a

basement. The metal cabinet contains the system electronics, fuses and

stand-by battery. There is normally no reason for anyone but the installer or

serviceman to have access to the control panel. The PC1500RK keypads

have an audible indicator (buzzer), a group of zone and system status

lights and command entry keys. The keypad is used to send commands to

the system and to display the current system status. The security station(s)

will be mounted in a convenient location inside the protected premises

close to the entry/exit door(s).

The security system has several zones of area protection and each of these

zones will have one or more sensors connected to it (motion detectors,

glassbreak detectors, door contacts, etc.). When a sensor is in alarm, the

zone of alarm will be indicated on the PC1500RK (zone lights 1 through 6).

ImporImpor

Impor

tant Noticetant Notice

tant Notice

A security system cannot prevent emergencies. It is only intended

to alert you and, if included, a monitoring station, of an emergency

situation. Security systems are generally very reliable but they may

not work under all conditions and they are not a substitute for prudent

security practices or life and property insurance. Your security

system should be installed and serviced by qualified security

professionals who should instruct you on the level of protection that

has been provided and on system operations.

1 2 3 4 5 6 ... 15 16

Inhaltsverzeichnis

Seite 1 - General System Operation

1About Your Security SystemYour DSC security equipment has been designed to give the greatestpossible flexibility and convenience. Read this manual c

Seite 2 - Master Code

11• Write the plan down and rehearse frequently, so that should an emergencyarise, everyone will know what they are to do. Revise the plan asconditio

Seite 3 - Door Chime Feature

SYSTEM REFERENCEZONE PROTECTED AREA ZONE TYPE1 ____________________________ ________________________________2 ____________________________ ___________

Seite 4 - Alarm Memory Display

NOTICE: The Canadian Department of Communications label identifies certified equipment. Thiscertification means that the equipment meets certain telec

Seite 5 - Viewing Trouble Conditions

LIMITED WARRANTYDigital Security Controls Ltd. warrants the originalpurchaser that for a period of twelve months fromthe date of purchase, the product

Seite 6 - Fire Alarm Operations

WARNING Please Read CarefullyNote to InstallersThis warning contains vital information. As the only individual incontact with system users, it is your

Seite 7 - Maintenance

Seite 8 - INSTALLER

Seite 9 - Family Escape Planning

2Master CodeThe 4 digit Master Code is used to arm and disarm the security system, toprogram additional security codes and to change other system feat

Seite 10

3Entry Delay Off ArmingIf you wish to arm your system and eliminate the entry delay, enter [*][9]before your access code. The “Armed” light will flash

Seite 11 - FOR SERVICE:

4Alarm TestEnter [*][6][Master Code][8] for a 2-second test of the keypad lights,keypad buzzer, battery and the bell/siren.Press [#] to return to Read

Seite 12

5NOTE: The alarm memory is cleared each time the panel is armed so thatany alarms showing are alarms that occurred only during the lastarmed period.If

Seite 13 - LIMITED WARRANTY

6Pressing any key on the keypad will silence the sounder but the “Trouble”light will remain ON until the trouble condition is cleared. If you cannotde

Seite 14 - WARNING Please Read Carefully

7ResetTo restore the smoke detector(s) to normal, press [*][7]. If the detector stillhas smoke in it, the alarm will resound and the sequence describ

Seite 15 - Instruction

8 9Press [F] for 2 seconds to activateFIRE transmission.Press [A] for 2 seconds to activatean AUXILIARY transmission.Press [P] for 2 seconds to activa

Seite 16

10Fire Safety in the HomeMost fires occur in the home and to minimize this danger it isrecommended that a household fire safety audit be conducted and

Kommentare zu diesen Handbüchern

Keine Kommentare

DSC PC1550 Technical Information

Stöbern Sie online oder laden Sie Technical Information nach Rauchmelder DSC PC1550 herunter. DSC PC1550 System information Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Rauchmelder DSC PC1550