DSC IT-230 Installationshandbuch PDF herunterladen (Seite 4)

IMPORTANT

This manual shall be used in conjunction with the Alarm Controller PowerSeries Panel manual; All the safety

instructions specified within that manual (or equivalent) shall be observed. The PowerSeries Panel is refer-

enced as “panel” throughout this document.

The IT-230 Interface shall be installed in the location specified in these instructions. The equipment enclosure

must be fully assembled and closed, with all the necessary screws/tabs, and secured to a wall before opera-

tion. Internal wiring must be routed in a manner that prevents:

• Excessive strain on wire and on terminal connections,

• Interference between power limited and non power limited wiring,

• Loosening of terminal; connections, or

• Damage of conductor insulation.

WARNING: Never install this equipment during a lightning storm!

Safety Information

External wiring must be protected and routed in a such a way that all the local, state, federal electrical code

and regulations and fire codes are fully met; the external wiring shall pose no risks for an operator. The external

wiring shall be clearly labeled at both ends. Where required, NOTIFY the local authorities in regard to the per-

formed wiring.

The Installer must instruct the System user on each of the following:

• Do not attempt to service this product. Opening or removing covers may expose the user to dangerous

voltages or other risks.

• Any servicing shall be referred to trained service personnel only.

• Use authorized accessories only with this equipment.

Model Information

IT-230: Is an RS-422 Interface that allows two way message transfer between DSC PC1616/PC1832/PC1864

Power Series Panel and C24-HUB. The IT-230 provides C24 Interactive monitoring and control via an

RS-422 balanced line link to the C24-HUB. The link speed is 115.2 KB and is programmable by the installer.

NOTE: The C24-HUB is an interface device which connects to security panels, IP cameras, sensors,

Z-wave based home automation devices, etc. to deliver a host of advanced functionality. Life-style

events are defined as “non alarm” events. Life-safety events are defined as “alarm” events.

Features

• Full event reporting to central station and C24 Interactive, via RS-422 to C24-HUB.

• Programmable Labels.

• RS-422 balanced line communication to external C24-HUB up to 1,000 ft. (305 m).

• Buffers 1,000 date and time stamped Life Style events to C24-HUB as First In First Out (FIFO) messages.

Technical Specifications

The input voltage to the IT-230 Interface can be drawn from the Underwriters Laboratories/Underwriters Labo-

ratories Canada (UL/ULC) Listed Control Panel or provided by an external UL/ULC Listed power supply rated

for the application (external power-limited source).

NOTE: The power supply must be Class II, Power Limited.

Ratings

Compatibility

NOTE: Enter [*][8][Installer Code] [900] at keypad to view the Power Panel Version number.

GENERAL

Table 1: IT-230 Interface Module Ratings

Model IT-230 Interface Module

POWER SUPPLY RATINGS

Input Voltage 11.1~12.6 VDC

CURRENT CONSUMPTION

Standby Current

140mA @ 12 VDC

ENVIRONMENTAL SPECIFICATIONS

Operating Temperature 0°C - 49°C (32°F- 120°F)

Humidity 5% ~ 93% relative humidity, non-condensing

MECHANICAL SPECIFICATIONS

Board Dimensions (mm) 150 × 50 × 15

Weight (grams) 45

Table 2: Compatible Power Panels

Interface Panel Description

IT-230 Power Series

• Power Series PC1616, version 4.5+

• Power Series PC1832, version 4.5+

• Power Series PC1864, version 4.5+

1 2 3 4 5 6 7 8 9 ... 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

DSC IT-230 Installationshandbuch Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung DSC IT-230