DSC Power832 Security System PC5016 Spezifikationen PDF herunterladen (Seite 16)

K E Y P A D C O M M A N D S

• [7] - Enable Background Music

If the intercom is being used to provide background music, press the [7] key to toggle the background

music feature on and off.

Additional Features are available using on the LCD keypad. These features do not have

numbers assigned. Use the arrow keys (< >) to scroll through the [

] [6] menu and press the

[ ] key to select the following commands.

View Event Buffer

The 256 event buffer can be viewed through any LCD keypad

(See Section 5.16.1 “Viewing the Event

Buffer Through the LCD Keypad”)

Brightness Control

When this option is selected the keypad will allow you to scroll through 10 different backlight level options.

Use the arrow keys (<>) to scroll to the desired backlight level and press the [#] key to exit.

Contrast Control

When this option is selected the keypad will allow you to scroll through 10 different contrast level options.

Use the arrow keys (<>) to scroll to the desired contrast level and press the [#] key to exit.

Keypad Buzzer Control

When this option is selected the keypad will allow you to scroll through 21 different keypad sounder tone

options. Use the arrow keys (<>) to scroll to the desired keypad beeper level and press the [#] key to exit.

This function can be achieved on LED keypads by holding the [

] key.

[

]+[7] Output Functions

Two Output Functions can be performed at a keypad. They are Utility Output and Smoke Detector Reset.

To activate Utility Output:

Press [ ] [7] [1][Access Code].

The panel will activate all PGM Outputs for 5 seconds programmed as Utility Output for that Partition

(See

Section 5.10 “PGM Outputs”)

To activate Smoke Detector Reset:

Press [

] [7] [2].

The panel will activate all PGM Outputs for 5 seconds programmed as Sensor Reset.

[ ]+[8] Installer Programming

Enter [ ][8] followed by the Installer Code to enter Installer Programming

(See Section 4.0 “How to Program”).

[ ]+[9] Arming Without Entry Delay

When a Partition is armed with the [ ][9] command the panel will remove the entry delay from the

partition. After the exit delay, Delay 1 and Delay 2 type zones will be instant and Stay/Away zones will

remain bypassed.

(See Section 5.1 “Zone Definitions”).

A valid access code must be entered after pressing [ ] [9].

[

]+[0] Quick Arm/Quick Exit

Quick Arm

If the Quick Arm Enable option is enabled the panel can be armed by entering [

][0]. This is a useful

method of arming a Partition when someone without a User Code will be required to arm a Partition.

Quick Exit

Quick Exit will allow someone to leave an armed premise through a Delay type zone without having to

disarm and rearm the system.

When [

][0] is entered, if the Quick Exit Enabled option is enabled, the panel will provide a two minute

window to exit. During this time the panel will ignore the first activation of a Delay type zone. When the

Delay zone is secured the panel will end the two minute time period.

If a second Delay zone is tripped, or if the zone is not restored after two minutes, the panel will start entry delay.

If Quick Exit is used on a partitioned system, Keypad Blanking and Access Code Required to

Remove Blanking should be enabled.

Code Required for Bypass ............................ Section [015], Option [5]

Master Code Not Changeable option............ Section [015], Option [6]

Quick Arm Enable .......................................... Section [015], Option [4]

Quick Exit Enable .......................................... Section [015], Option [3]

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

DSC Power832 Security System PC5016 Spezifikationen Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme DSC Power832 Security System PC5016