DSC PC6010 Betriebsanweisung PDF herunterladen (Seite 15)

5.3 Viewing and Resetting System Faults ___________________________________________

NOTE: A fault condition reduces the security your system is designed to provide. Call your

installation company or service technician to arrange service.

The control panel continuously checks for a number of possible faults. If one of these

faults occur, the keypad beeps twice every 10 seconds. To see a list of system faults, enter

your access code and follow the procedure below.

Basic users will only be able to view the following faults:

• Telephone line • Seismic detector test

• Battery • Fire trouble

• AC power • General System Fault

The system will give Advanced, Supervisor and Master users additional information in the

fault messages.

If (AC) Power Fault is present, the system has lost its power. This trouble may be due to

a power outage and should be cleared once the power is restored. If the power on the

premises is running normally and the trouble condition persists, call your installation

company for service.

If Telephone Line Fault is present, there is a problem with the telephone line. If the

telephones on the premises are running normally and the trouble condition persists, call

your installer for service.

Any other trouble condition will require the assistance of your installation company. As

soon as a trouble condition occurs, call your installation company or service technician to

have the problem corrected.

1. After you have entered your access code, if there is a fault, the keypad displays:

System Fault

View Fault List?

To exit fault viewing, press .

To view faults, press

2. The keypad displays the list of faults. If you see a flashing

>, use the keys to

scroll through the list of faults.

3. When you come to the end of the list, the keypad displays:

End of List

Clear Faults?

To return to the main menu, press .

To clear the faults, press

4. The system attempts to reset the faults. If all the faults are reset, the keypad displays:

Fault(s) Now

Cleared!

5. If the system cannot reset all the faults, the keypad displays:

Unable to Clear Call for Service

All Fault(s)!

then, Exit Now?

To view the faults again, press .

To exit fault viewing, press

5: Viewing Events and System Status

Step

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

DSC PC6010 Betriebsanweisung Seite 15

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme DSC PC6010