DSC PC6010 Betriebsanweisung PDF herunterladen (Seite 22)

S E C T I O N 7

Changing System Settings

7.1 Changing Keypad Settings ______________________________________________________

Supervisor and Master users can change four keypad settings: the door chime setting,

keypad display brightness, keypad display contrast, and keypad buzzer volume. These

settings can be changed at each system keypad. To change any of these settings:

1. 12:00 2000/01/01

Enter Your Code

From the start screen, enter your access code.

2. Press

until the keypad displays:

Change Keypad

Setup?

To confirm, press .

3. The keypad displays the beginning of the keypad setup menu.

Use the

keys to scroll to the keypad setting you want to change, and then

press . Each of the four settings is described below.

Changing the Door Chime Setting

Door Chime Control?: If you turn this feature on, the keypad will beep five times

when selected zones are opened or closed. This feature is normally used to notify users

when entry/exit doors are opened and closed. Ask your installer which zones will activate

the door chime.

After answering

to the prompt, press again to turn the door

chime on or off.

Changing Keypad Brightness

Brightness Control?: This option allows you to control how bright the keypad

backlighting will be when the keypad is not in use.

After answering

to the prompt, press to increase the backlighting, or

to decrease the backlighting.

Press

to save the backlighting setting.

Changing Keypad Contrast

Contrast Control?: This option allows you to control how much contrast there is on

the keypad display.

After answering

to the prompt, press to increase the contrast, or to

decrease the contrast.

Press

to save the contrast setting.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Keine Kommentare

DSC PC6010 Betriebsanweisung Seite 22