DSC PC6010 Betriebsanweisung PDF herunterladen (Seite 6)

Zones and Areas

The security system has several zones (monitored areas). Each of these zones will be

connected to a sensor (motion detectors, glassbreak detectors, door contacts, etc.). If a

sensor goes into alarm, the keypad displays a message (i.e. zone in alarm).

Your installer may have divided the system into different areas. Each area includes one or

more zones, and can be turned on and off independently of other areas. Your installer

should explain to you which areas have been programmed, and which zones belong to

which areas.

Access Codes

As a user of the system, you will be assigned a 4- or 6-digit access code. You can use your

access code to turn areas on and off, and to access other system functions.

Your access code may not allow you to use certain system functions. For instance, if your

code is only allowed to turn on area 1, you will not be able to turn on other areas. For

more information on access codes and how to program them, please see section 6.

1.3 Remote Monitoring _____________________________________________________________

The system can send alarms, troubles and emergency messages over telephone lines to a

central station. If you accidentally initiate an alarm, immediately call the central station to

prevent an unnecessary response.

NOTE: Your installer must enable monitoring for it to work.

IMPORTANT NOTICE

A security system cannot prevent emergencies. It is only intended to alert you and – if included – your

central station of an emergency situation. Security systems are generally very reliable but they may not

work under all conditions and they are not a substitute for prudent security practices or life and property

insurance. Your security system should be installed and serviced by qualified security professionals who

should instruct you on the level of protection that has been provided and on system operations. For

important warnings and cautions, please see inside the back cover.

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Keine Kommentare

DSC PC6010 Betriebsanweisung Seite 6