DSC Envoy NT9010 Installationsanleitung PDF herunterladen (Seite 37)

Section 2.2: Changing How the NT9010 Works For Users

NOTE:

Keys [27] to [30] are instant function keys. They do not have to be

held for 2 seconds to activate.

2.2.11 Programming

Wireless

Keys

If you will be adding WLS929-433 wireless keys, after you enroll them on the sys-

tem you may want to change the functions of the buttons on these devices.

If you enable the WLS Key Does Not Use Access Codes option, the disarm but-

ton will work on wireless keys which have not been assigned access codes. To pre-

vent disarming by wireless keys which don’t have access codes, disable this option.

To change wireless key function buttons, from Advanced Programming:

1. Enter section [804].

2. Enter the 2-digit sub-section number of the button you want to program:

[61] = Wireless key button 1

[62] = Wireless key button 2

[63] = Wireless key button 3

[64] = Wireless key button 4

3. Enter the 2-digit code from the list below for the function you want the button

to have:

4. Repeat steps 1 to 3 until all buttons are programmed.

Wireless Key Function

Button Programming . . . . . . . . . . . . . . . . . . . . . . .Sections [804]-[61] to [804]-[64]

WLS Key Does Not Use Access Codes . . . . . . . . . . . . . . . Section [017], Option [1]

2.2.12 Fire,

Auxiliary,

and Panic

Keys

Three emergency keys are available on the NT9010. Each pair of keys must be

pressed and held for 2 seconds before they will activate. This 2 second delay is

designed to help prevent accidental activation.

Entry Description

Can Be Used

on Wireless

Key

00 Null Key (Key not used) Yes

03 Stay Arm Yes

04 Away Arm Yes

05 No entry delay arming No

06 Door Chime On/Off Yes

07 System Test Yes

16 Quick Exit Yes

17 Activate Stay/Away Zones Yes

27 Disarm (Off) Yes

28 FIre Alarm Yes

29 Auxiliary Alarm Yes

30 Panic Alarm Yes

31 Status Yes

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

DSC Envoy NT9010 Installationsanleitung Seite 37

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme DSC Envoy NT9010