DSC PC5020 Installationshandbuch PDF herunterladen (Seite 5)

Digital Communicator Specifications:

• Supports all major formats including SIA, Contact ID, and Res-

idential Dial

• Split reporting of selected transmissions to each telephone

number

• 3 programmable telephone numbers

• 1 system account number, plus 8 partition account numbers

• Supports LINKS1000 cellular communication

• DTMF and pulse dialing

• DPDT line seizure

• Anti-jam detection

• Event-initiated personal paging

System Supervision Features

The PC5020 continuously monitors a number of possible trouble

conditions including:

• AC Power Failure

• Trouble by Zone

• Fire Trouble

• Telephone Line Trouble

• Low Battery Condition

• Bell Output Trouble

• Loss of Internal Clock

• AUX Power Supply Fault

• Tamper by Zone

• Failure to Communicate

• Module Fault (Supervisory or Tamper)

• Camera Troubles via DLM-4L

False Alarm Prevention Features

• Audible Exit Delay

• Audible Exit Fault

• Urgency on Entry Delay

• Quick Exit

• Swinger Shutdown

• Recent Closing Transmission

• Cross Zone Alarm

• Burglary-verified timer

• Double Hit Timer

• Communication Delay

• Rotating Keypress Buffer

Additional Features

• Automatic arming by partition at a specified time, each day of

the week

• Keypad activated alarm output and communicator test

• Keypad lockout

• Audio capability using the PC5928 Audio Interface Module,

which allows local intercom and central station 2-way listen-

• All modules connect to the system via a four wire Keybus, up

to 1000’/305m from the main panel

• Event buffer can be printed using PC5400 RS232 Serial Inter-

face module

• Supports the Escort5580 Voice Prompt Module, with automa-

tion and lighting control

• 256 event buffer, time and date stamped

• Uploading/downloading capability

• Daylight savings time option

• Downlook support (DLM-4L v1.0 and PC5108L)

1.4 Additional Devices

In addition to the information below, see the back cover for a

DSC Module Compatibility table.

Keypads

A maximum of 8 keypads can be connected to the control panel.

You can connect any combination of the following listed. Differ-

ent keypads (with function keys) can be used for different size

systems: 8 zone, 16 zone, 32 zone, and 64 zone.

• PC5508Z: 8 zone LED keypad, with one zone input

• PC5532Z: 32 zone LED keypad, with one zone input

• PC5516Z: 16 zone LED keypad, with one zone input

• LCD5500Z: LCD keypad, with one zone input

• LCD5501Z: LCD-style keypad, with one zone input

NOTE:

The following keypad versions can only be used on

the first two partitions (Partition 1 and Partition 2), and the

first 8, 16, or 32 zones:

PC5508(Z), PC5516(Z), PC5532(Z) versions v2.00 and lower

LCD5500(Z) versions 2.x and lower

LCD5501Z versions 1.x and lower

PC5100 2-Wire Addressable Device Interface Module

The PC5100 module is used to connect 2-wire addressable

devices to the system. Up to 32 2-wire addressable devices can

be added to the system

NOTE:

PC5100 v1.0 and lower modules can only support

the first 32 zones on the Power864 system.

PC5108 Eight Zone Expander Module

Eight zone expander module can be used to increase the number

of zones on the system. Up to 7 modules can be connected to

increase the system zones to a maximum of 64. (See the PC5108

Installation Instructions Sheet.)

NOTE:

PC5108 v1.0 and lower modules can only support

the first 32 zones on the Power864 system. PC5108 v1.0 and

lower modules enroll as two modules and use up two

supervisory slots.

NOTE:

Do not mix PC5108 v1.x and lower modules with

PC5108 v2.0 and higher modules on the same system.

PC5132 Wireless Receiver Module

The PC5132 Wireless Receiver module can be used to connect up

to 32 wireless devices. All devices are fully supervised and use

standard ‘AAA’ or ‘AA’ alkaline batteries. (See the PC5132 Instal-

lation Manual for details.)

NOTE:

Only the first 32 zones on the Power864 system can

be used as wireless zones.

Additional wireless devices are available:

WLS904 Wireless Motion Detector

The Wireless Motion Detector can be used in conjunction with

the PC5132 Wireless Receiver to include wireless space protec-

tion. The unit comes with four ‘AAA’ batteries.

WLS906 Wireless Smoke Detector

The Wireless Smoke Detector can be used in conjunction with

the PC5132 Wireless Receiver to include wireless smoke detec-

tion. The unit comes with six ‘AA’ batteries.

1 2 3 4 5 6 7 8 9 10 ... 42 43

Kommentare zu diesen Handbüchern

Keine Kommentare

DSC PC5020 Installationshandbuch Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme DSC PC5020