DSC PC5020 Installationshandbuch PDF herunterladen (Seite 6)

Introduction: 1.4 Additional Devices

WLS907 Wireless Universal Transmitter

The Wireless Slimline Universal Transmitter can be used with the

PC5132 Wireless Receiver to add wireless door or window con-

tacts. The unit comes with three ‘AAA’ batteries and has built-in

contacts.

WLS908 Wireless Panic Pendant

The Wireless Panic Pendant can be used in conjunction with the

PC5132 Wireless Receiver to include personal wireless protec-

tion. The unit comes with 1 mini 12V battery (not user change-

able).

WLS909 Wireless Key

The Wireless Key can be used in conjunction with the PC5132

Wireless Receiver to include a simple and mobile method of arm-

ing and disarming the system. The unit comes with three Photo/

Electronic 1.5V batteries.

This system can have a maximum of 16 Wireless Keys.

WLS910 Wireless Handheld Keypad

The Wireless Handheld Keypad can be used in conjunction with

the PC5132 Wireless Receiver to include a simple and mobile

method of arming and disarming the system. The unit comes

with three ‘AAA’ batteries.

The system can have a maximum of four Wireless Handheld Key-

pads.

WLS912 Wireless Glassbreak Detector

The Wireless Glassbreak Detector can be used in conjunction

with the PC5132 Wireless Receiver to include wireless glassbreak

detection. The unit comes with three ‘AA’ batteries.

WLS914 Dual PIR Wireless Motion Detector

The Dual PIR Wireless Motion Detector can be used in conjunc-

tion with the PC5132 Wireless Receiver to include wireless space

protection. The unit comes with four ‘AAA’ batteries.

WLS915 Wireless Universal Transmitter

The WLS915 Wireless Universal Transmitter is a smaller transmit-

ter that can be used with the PC5132 Wireless Receiver. The unit

comes with three ‘AAA’ batteries and has built-in contacts.

PC5204 Power Supply Output Module

The PC5204 can provide up to 1 Amp of additional power for

modules or devices connected to the control panel. The module

requires a 16.5 volt AC 40 VA transformer and 4 AH battery. In

addition, the module provides 4 programmable high current volt-

age outputs. (See PC5204 Installation Instructions for details.)

PC5208 Eight Low Current Output Module

Adds eight programmable low current outputs (50 mA) to the

control. (See the PC5208 Installation Instructions for details.)

NOTE:

If you use both the main panel and the PC5208 out-

puts, PGM3 will work the same as the first PC5208 output,

and PGM4 will work the same as the second PC5208 out-

put.

Escort5580 Module

This Escort5580 module will turn any touch-tone telephone into

a fully functional keypad. The module also includes a built-in

interface to control up to 32 line carrier type devices for lighting

and temperature control (See the Escort5580 Installation Manual

for details.)

NOTE:

Users will not be able to access partitions 3 to 8, and

zones 33 to 64 through Escort5580 versions 2.x and lower.

Only partitions 1 and 2, and zones 1 to 32 are supported on

these versions.

PC5928 Audio Interface Module

The PC5928 Audio Interface module is a simple way to incorpo-

rate paging, intercom, baby listen-in and door answer to the

PC5020 control panel. The module also has built-in two-way

voice capability for central station (See the PC5928 Installation

Manual for details).

NOTE:

The PC5928 version 1.x and lower will only support

partitions 1 and 2, and zones 1 to 32.

Three additional devices are available:

• PC5921 Intercom Audio Station can be used in conjunction

with the PC5928 Audio Interface Module.

• PC5921 EXT Door Box Audio Station can be used in conjunc-

tion with the PC5928 Audio Interface Module.

• PC5921 EXT/R Door Box Audio Station can be used in con-

junction with the PC5928 Audio Interface Module. The Door

Box contains a relay so the normal door bell can be used

instead of the internal one generated by the PC5928 module.

PC5400 Printer Module

This PC5400 Printer Module will allow the panel to print out all

events that occur on the system to any serial printer. All events

will be printed with the Partition, time, date and the event that

occurred. (See PC5400 Installation Manual for details.)

NOTE:

The PC5400 v2.x and lower only supports events on

partitions 1 and 2, and zones 1-32.

LINKS1000 Cellular Communicator

The LINKS1000 Cellular Communicator provides an efficient,

cost-effective method for adding cellular back up. The unit

comes in its own cabinet with antenna and requires a separate

battery and transformer (see section 5.24

“LINKS1000 Cellular

Communicator”

on page 32).

Downlook Support: PC5108L and DLM-4 v1.0L

The PC5108L will expand the control panel’s zone capability by

adding eight fully programmable zone inputs. The module will

also act as an interface between the DLM-4L v1.0 Video Trans-

mission module and the PC5020 control panel. The PC5108L is

also an 8-camera video switcher.

For more information on either module, see their respective

installation manuals.

NOTE:

The PC5108L module can only be assigned zones

from 1 to 32. The PC5108L will not support zones 33 to 64.

Camera scripts can only be run for zones 1 to 32. The

PC5108L enrolls as two expander modules and use up two

supervisory slots.

NOTE:

Do not mix PC5108L v1.x and lower modules with

PC5108 v2.0 and higher modules on the same system.

PC5700 Fire Module

This is a zone expansion module with four general purpose zone

inputs, two Class A supervisory waterflow zone inputs, ground

fault detection and dual-supervised telephone line inputs.

PC5720 Fire Module

This is a zone expansion fire module that can be used for ULC-

listed non-residential fire applications. The PC5720 can also be

used as an interface between the control panel and either a serial

printer or a DVAC communications network.

1 2 3 4 5 6 7 8 9 10 11 ... 42 43

Kommentare zu diesen Handbüchern

Keine Kommentare

DSC PC5020 Installationshandbuch Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme DSC PC5020