DSC Power432 PC585 Installationshandbuch PDF herunterladen (Seite 5)

Section 1: System Introduction

1.1 Specifications

Downloading Software Support

• PC585 v3.0 uses DLS 2002 and higher

Flexible Zone Configuration

• Four fully programmable zones

• System expandable to 8 zones using keypad zone inputs and

to 32 zones using the PC5132 wireless expansion module

• 38 access codes: one master code, one maintenance

code, two duress codes, two supervision codes and 32

general access codes

• 27 zone types; 8 programmable zone attributes

• Normally closed, single EOL and double EOL zone wiring

• 32 wireless zones with the PC5132 Wireless Receiver

Audible Alarm Output

• 700mA Supervised Bell Output (current limited at 3 amps),

12V

• Steady or Pulsed Output

EEPROM Memory

• Does not lose programming or system status on complete

AC and Battery failure

Programmable Outputs

• Two programmable outputs;

• Two different build options for PGM1 and PGM2

- PGM1 = 50mA; PGM2 = 50mA (50/50 products)

- PGM1 = 300mA; PGM2 = 50 mA (300/50 products)

- PGM1 = 50mA; PGM2 =300 mA (50/300 products)

Powerful 1.5 Amp Regulated Power Supply

• 550 mA Auxiliary Supply, 12 V

• Positive Temperature Coefficient (PTC) components

replace fuses

• Supervision for loss of AC power, low battery

• Internal clock locked to AC power frequency

Power Requirements

• Transformer = 16.0 V

AC, 40VA

• Battery = 12 volt 4 Ah minimum rechargeable sealed lead

acid battery

Remote Keypad Specifications

• Keypads available:

- PC1555RKZ eight zone LED keypad with zone input

- PC5508Z eight zone LED keypad with zone input

- PC5516Z sixteen zone LED keypad with zone input

- PC5532Z thirty-two zone LED keypad with zone input

- LCD5500Z alphanumeric keypad with zone input

- LCD5501Z fixed message LCD keypad with zone input

- LCD5501Z32-433 fixed message LCD keypad/receiver

- PC5502Z2 two zone LED keypad

• All keypads have five programmable function keys

• Connect up to 8 keypads

• 4-wire (Quad) connection to Keybus

• Built in piezoelectric buzzer

Digital Communicator Specifications

• Supports major communication formats including SIA and

Contact ID

• Event-initiated personal paging

• Three programmable telephone numbers

• Two account numbers

• DTMF and pulse dialing

• DPDT line seizure

• Anti-jam feature

• Split reporting of selected transmissions to each telephone

number

System Supervision Features

The PC585 continuously monitors a number of possible trou-

ble conditions including:

• AC power failure • AUX Power Supply Trouble

• Fault by zone • Loss of internal clock

• Tamper by zone • Bell output trouble

• Fire trouble • Telephone line trouble

• Failure to communicate • Low battery condition (panel)

• Low battery by zone (wireless)

• Module fault (supervisory or tamper)

False Alarm Prevention Features

• Audible Exit Delay • Quick Exit

• Audible Exit Fault • Cross Zone Burglary Alarm

• Communication Delay • Rotating Keypress Buffer

• Urgency on Entry Delay

Additional Features

• Auto-arm at specified time

• Keypad-activated alarm output and communicator test

• All modules connect to the system via a four wire Keybus

up to 1000’/305m from main panel

• An event buffer which records the past 128 events with

both the time and date at which they occurred; buffer can

be printed using PC5400 serial interface module, or

viewed with the LCD5500Z keypad and DLS 2002 software

• Supports the addition of the PC5132 wireless receiver for

integration of wireless devices

• Uploading and downloading capability

• Local downloading capability through the use of the

PC-LINK adaptor

• Added Keybus fault protection: clock and data outputs

have been programmed to withstand shorts to +12v to pre-

vent control panel damage

1 2 3 4 5 6 7 8 9 10 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare

DSC Power432 PC585 Installationshandbuch Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme DSC Power432 PC585