DSC PC6010 Installationshandbuch PDF herunterladen (Seite 34)

Arming/disarming schedules are used to auto arm or auto disarm area(s) according to the selected date

schedule. There are 50 Arm/Disarm schedules.

The following options are programmable for each Arm/ Disarm schedule:

Choose a Date Schedule

Enter the two digit number of the Date schedule that will be used to auto arm/disarm. Enter Schedule

[02]-[99]. Do not use schedules 00 or 01. If these schedules are used, the arm/disarm schedule will never

activate.

Choose the Areas

Toggle the option to [Y] for the areas that are to autoarm or autodisarm, following the selected schedule.

Programming Date Schedule Intervals for Auto Arm/ Disarm

1. Program the time to auto arm or auto disarm as the Start time for an interval. Program the End time as

one minute after the Start time. For example, to auto arm or auto disarm at 8AM, program the Start

time as 0800 and the End time as 0801.

2. Select [Y] for the days of the week the areas will auto arm or auto disarm.

3. If the panel is not supposed to auto arm or auto disarm on certain days, select [Y] for any Holiday

Group the schedule is to follow.

4. Finally, toggle the Auto Arm or Auto Disarm toggle option, depending on which function the panel

should perform.

NOTE: Each interval can be used for either auto-arming or auto-disarming, but not both.

Additional Programming:

In order for arm/disarm schedules to work, you must also enable the toggle option “AutoArm Enab.” for

each area (see “Area Toggles”).

ARM/DISARM SCHEDARM/DISARM SCHED

ARM/DISARM SCHED

(3)(3)

(3)

Example of Auto Arm/Disarm Scheduling:

Arm/Disarm Schedule 25 programmed with

Date Schedule 11

Area 1 - Y

All other areas - N

Date Schedule 11 programmed with

Start Time End Time Day Holiday AutoArm AutoDisarm

(HHMM) (HHMM) S M T W T F S 1 2 3 4 Y/N Y/N

Interval 1 1830 1831 N Y Y Y Y Y N N N N N Y N

Interval 2 0830 0831 N Y Y Y Y Y N N N N N N Y

Interval 3 1030 1031 Y N N N N N Y N N N N Y N

In this example Area 1 will Autoarm Monday to Friday at 6:30PM (interval 1), and Autodisarm Monday to

Friday at 8:30AM (interval 2). On Saturday and Sunday area 1 will autoarm at 10:30PM (interval 3).

SYSTEM AREASYSTEM AREA

SYSTEM AREA

EVENT SCHEDULINGEVENT SCHEDULING

EVENT SCHEDULING

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

DSC PC6010 Installationshandbuch Seite 34

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme DSC PC6010