1. Re-enter the premises.
2. Enter your [access code] to disarm the system. You must do this before the entry delay timer expires.
3. Follow the Away Arming procedure again, making sure to close the entry/exit door properly.
Arming Error
An error tone will sound if the system is unable to arm. This will happen if the system is not ready to arm (i.e., sensors
are open), or if an incorrect user code has been entered. If this happens, ensure all sensors are secure, press [*] and try
again.
Disarming (Turning Off /Unsetting)
Enter your access code to disarm anytime the system is armed (i.e., the Armed (lock) indicator is on). The keypad will
beep if you walk through the entry door. Enter your code within the allotted time to avoid an alarm condition (please
check with your installer to have this time programmed).
Disarming Error
If your code is invalid, the system will not disarm and a 2-second error tone will sound. If this happens, press [#] and try
again.
Stay Arming (Partially Turning On / Part Setting)
Stay arming will bypass the interior protection (i.e., motion sensors) and arm the perimeter of the system (i.e., doors
and windows). Close all sensors (i.e., stop motion and close doors). The Ready (checkmark) indicator should be on. Ask
your alarm company if this function is available on your system.
Press and hold the Stay key for 2 seconds and/or enter your Access Code and do not leave the premises (if your installer
has programmed this button). During the setting state (exit delay active), the Armed (lock) and Ready (checkmark)
indicators will turn on, and the keypad will sound one beep every three seconds.
When the exit delay is completed, the alarm system is armed/set and this is indicated on the keypad as follows: the
Ready (checkmark) indicator will turn off, the Armed (lock) indicator will remain on and the keypad will stop sounding.
The Armed (lock) indicator and Bypass or System indicator will turn on. The system will automatically bypass certain
interior sensors (i.e., motion sensors).
Note: For SIA FAR listed panels, the Stay Arming Exit Delay will be twice as long as the Away Arming Exit Delay.
Night Arming
To fully arm the system when it has been armed in Stay Mode, press [*][1] at any keypad. All interior zones will now be
armed except for devices programmed as Night Zones.
Night zones are only armed in Away mode. This permits limited movement within the premises when the system is fully
armed. Ensure that your installer has provided you with a list identifying zones programmed as night zones.
When the interior zones have been activated (i.e., [*][1] you must enter your access code to disarm the system to gain
access to interior areas that have not been programmed as night zones.
Silent Exit Delay
(48 Seiten)
(12 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern