
22
PC4000
PC4010 Version 1.0
PC4020 Version 1.0
PC580
PC1555
PC1575
PC5010
PC5015
PC4010/4020 v2.x
PC4010/4020 v3.0
PC4020KT v1.0
These account types allow you to select which sections in the
selected file are printed. When you select Print DLS-1 File...
from the Account menu, a DOS window is opened and within
the DOS window is a window showing a list of all the sections
for the selected account. Any section in the window can be
selected for printing by highlighting the section and pressing
SPACE. An arrow to the left of a section indicates that the
section has been selected for printing. If an arrow is displayed
to the right of a section then there are subsections for selecting
partitions, outputs, etc. The following options can be selected
by pressing [F2] to call up the Printer Functions menu:
• Tag Entire File
• Untag Entire File
• Print
These account types are printed from the account itself. If you
attempt to print these types of panels from the Print DLS-1 File
function, the message “This file is printed from within Edit a
File. Press any key to continue.” will be displayed.
Refer to the DLS-1 Instruction Manual for additional information
on printing PC580, PC1555, PC1575, PC5010, and PC5015
accounts.
PC4010/4020 v2.x, PC4010/4020 v3.0 and PC4020KT v1.x
DLS-2 account types are not printed using the Print DLS-1
File... function. These account types are printed from within the
account by using the Print button on the Communications
Window.
For instructions on using the Communications Window,
refer to The Communications Window in Section 4.
If the wrong printer port was selected during the installation of DLS-1 v6.5, it can be
changed from the DLS-1 Program Configuration menu.
Refer to the DLS-1 v6.5 Manual for additional information on DLS-1 Program
Configuration.
When the account programming is printed, the printout will use the DLS-1 Identifier
as the Account Name. The DLS-1 Identifier is used to indicate which account in
DLS-1 was printed out.
Note that printing may continue after ESC is pressed until the printer buffer is empty.
Kommentare zu diesen Handbüchern