DSC Classic PC580 Bedienerhandbuch PDF herunterladen (Seite 6)

After you log on, the software will display the Account Manager window for the [DLS2

Fixed Disk Group], and the software will attempt to initialize the modem. See section 3 for

a detailed explanation of the Account Manager.

If the software cannot initialize the communications port for the modem, a Communications

Error window will appear. Check that all modem settings are correct, that the modem is

connected to the correct communications port and that the modem is plugged in or

turned on. You may continue to work with the DLS-2 software and re-configure and re-

initialize the modem later but you cannot perform any uploading or downloading

functions until the modem has been configured properly. Refer to Modem Configuration

in Section 6 for instructions on setting the modem configuration.

If this is the first time that you are logging on to the DLS downloading software, you

should change the default password for the user code “DSC”. Create any additional

Account Manager Groups that may be required at this time. You may also add any other

DLS users that are needed. Keep a written record of these codes as it will be impossible

to enter the program if they are lost. The next section explains how to create DLS-2 users

and access codes.

Creating and Changing User Access Codes

Be sure to assign all the permissions and groups to the DSC access code before

creating any additional users. It is recommended that you assign to the DSC access

code the permissions and groups that would be needed by most users. Make any

additional changes that are required for each user later.

To add a User Access code, start by selecting ‘Access Code Maintenance’ from the

Security menu. The Access Code Maintenance window will be displayed.

The following options can be programmed for each user access code:

• User or Logon Name

• Access Code or Password

• Account Manager Groups to which the user will have access

• Language preferred by the user

• Permission to use certain DLS-2 functions

Up to 98 user access codes may be programmed. Access Code Maintenance is

explained in detail in Section 6.

About the User Code DSC

“DSC” is the Master code for the DLS-2 software. This code has access to all groups and

is granted all permissions. The DSC access code’s permissions and group assignments

are only used as a template for creating other User codes. Changing the settings for

other user codes does not remove any permissions or groups from the DSC access

code. This code cannot be renamed or deleted; only the password for the Master code

and the language assigned to the code may be changed.

1 2 3 4 5 6 7 8 9 10 11 ... 78 79

Keine Kommentare

DSC Classic PC580 Bedienerhandbuch Seite 6