DSC Classic PC580 Bedienerhandbuch PDF herunterladen (Seite 27)

Maxsys PC4010 v2.1 and lower, PC4020 v2.1 and lower, and PC4020KT,

all versions

Make note of the Downloading Access Code and Panel ID Code which can be

programmed in the DLS Section. Enter Installer’s Mode by pressing, [

✱✱

✱][8][Installer’s

Code]. To program the Downloading Access Code , enter [0] for System Area, then

[0][3] for DLS Section and then [4] for the Downloading Access Code. To program the

Panel ID Code , enter [0] for System Area, then [0][3] for DLS Section and then [3] for

the Panel ID Code.

These values must be entered into the account. Make sure that the Panel ID Code is not

the same as the ID Codes in other work files.

Refer to the control panel Installation Manuals for further information.

To Have the Computer Call the Control Panel

To enable the panel for downloading, first enter Installer’s programming.

Then press

[0]

for

System Area

, then

[0][3]

for

DLS Section

and then

DLS

Toggles [0]

. Ensure that the DLS Enabled (Ring Detect) function is enabled.

If there is an answering machine connected to the same line as the panel,

also ensure that the Double Call function is enabled. Exit the section. Select

[6]

for

# of Rings

to set the number rings for the panel to answer. Exit

Installer’s Programming Mode.

If you require the Callback feature as an additional level of security, select

[0]

for

DLS Toggles

while still in the

DLS Section

and enable DLS Callback.

If you enable this feature, you must also program the telephone number of

the downloading computer. Select

[2]

for

Phone Number

while still in the

DLS Section

and program the downloading computer’s telephone number.

To User Initiate a Call to the Computer

To enable the User Call Up function that allows the control panel to be able

to call the downloading computer, enter Installer’s Mode by pressing,

[

✱✱

✱][8][Installer’s Code].

Then press

[0]

for

System Area

, then

[0][3]

for

DLS Section

and then

DLS Toggles [0]

. Set the User Call Up feature and

exit the section.

When using this feature, a downloading telephone number must be

programmed. To program the downloading telephone number, select

[2]

for

Phone Number

from the

DLS Section

Exit Installer’s Programming, and then enter

[

✱✱

✱][6][Master Code][7]

initiate a call to the downloading computer.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 78 79

Kommentare zu diesen Handbüchern

Keine Kommentare

DSC Classic PC580 Bedienerhandbuch Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme DSC Classic PC580