DSC Classic PC580 Bedienerhandbuch PDF herunterladen (Seite 4)

Installing the DLS-2 Software

To install DLS-2, ensure that your hard disk drive has at least 10 megabytes of free disk

space. When installed, the DLS-2 Software will occupy approximately 5.3 megabytes.

NOTE: If you will be using DLS-2 to program systems which use the Escort4580,

or to program panels listed in the section "Compatible Control Panels (through

DLS-1 v6.5)" you must have installed DLS-1 v6.5 first. If you have not yet installed

DLS-1, exit Windows to DOS and install DLS-1 v6.5. Once DLS-1 has been installed,

return to Windows and start the DLS-2 Installation Program. DO NOT attempt to

install DLS-1 through Windows.

To install DLS-2:

1. Insert the DLS-2 Installation Disk into your 3½" disk drive.

2. From the Windows Program Manager File Menu, select “Run...”.

3. Use the Browse button to locate the disk drive with the DLS-2 Installation Disk.

4. Under File Name, select “setup.exe” and press ENTER or click “OK”.

A window will be displayed welcoming you to the DLS-2 Setup Program. Follow

the instructions in the Setup Program and DLS-2 will be installed on your

computer. To cancel the DLS-2 installation, click Cancel, then Exit Setup.

If you will be using DLS-2 to program systems which use the Escort4580, or to

program panels listed in the section "Compatible Control Panels (through DLS-1

v6.5)", check the

DLS2 4580 support

box when it is displayed.

6. Select the directory where DLS-2 will be installed. Click Next to accept the default

directory, or Browse to select a different directory. If the directory you select does

not exist, you will be given the option to create it.

NOTE: Do not install DLS-2 on a network drive. DLS-2 does not support network

use.

7. If you checked the

DLS2 4580 support

box, you will need to select the directory

where DLS-1 v6.5 is installed.

8. Select a modem type and COM port for DLS-2 to use. For more information on

setting up the modem, see Modem Configuration in section 6.

9. Setup will now install DLS-2 on your computer. If you are installing over a previous

version of DLS-2, select the option to overwrite any read-only files.

When the installation is complete, the new Program Group “DLS2” will

appear. Open the “DLS2” Program Group. The Program Group will

contain the DLS-1 and DLS-2 icons.

To start the DLS-2 software, double-click this icon.

1 2 3 4 5 6 7 8 9 ... 78 79

Keine Kommentare

DSC Classic PC580 Bedienerhandbuch Seite 4