DSC MAXSYS PC4020 Bedienerhandbuch PDF herunterladen (Seite 13)

Section 2: Access Codes

Access codes are used to arm and disarm the system as well as to access

system functions. There are many different codes available on the system.

The

Grand System Master Code Grand System Master Code

Grand System Master Code will be able to perform all system

functions. This includes zone bypassing, activating outputs enabling user

options and programming access codes. The Grand System Master Code

is access code 0001. Normally, only your installer can change this code.

Please ask your installer if you wish to be able to alter this code.

The following sections explain how to program new codes and modify

existing codes. All access code options will also be described.

2.1 Programming A New Access Code

This section describes the basic aspects to programming an access code:

• How to select a new access code for programming

• How to program the 4- or 6-digit code

• How to program the user’s name to identify the code

• How to select the partitions the code will be active on

To select a new access code for programming, perform the following steps:

1. Enter [

][5] followed by a Master Code.

2. The display will read:

Select (0) < >

User No. Search

Press [0] or [

3. The display will read:

Sel. Code (0001) < >

User 1

User 1 (Access Code 0001) is the System Master Code. Your installer

may already have programmed this code. Use the right arrow (>)

key to scroll to the code you wish to program (for example, access

code 0002). Press [

] to select the code.

4. The display will read:

Select (0) < >

Program Code

This is the

PrPr

ogram Code menuogram Code menu

ogram Code menu. Use the right arrow (>) key to scroll

though each display in the Program Code menu. Each display

pertains to a different aspect of access code programming, including

the three listed below. To select any menu item for programming,

press [

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

DSC MAXSYS PC4020 Bedienerhandbuch Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein DSC MAXSYS PC4020