DSC MAXSYS PC4020 Bedienerhandbuch PDF herunterladen (Seite 18)

••

•

ASCII Entry: ASCII Entry:

ASCII Entry: This

is for entering uncommon characters. Use the

arrow (< >) keys to scroll through the available characters. Each

character will be displayed along with the corresponding 3-digit

ASCII number. If you know the character’s 3-digit number, enter it.

Press the [

] key to enter the character into the code label. See

Appendix A at the back of this manual for a list of the available ASCII

characters.

2.5 Deleting an Existing Code

An access code may be erased in two parts. First, all data pertaining to

the code may be deleted (access code, user options, partition access, etc.).

The access code label is erased separately.

To delete all access code data from an existing code, perform the following:

1. Enter [

][5] followed by a Master code.

2. Locate the code using one of the code-searching methods (see Section

2.2 “Modifying an Existing Code”). Press [

] to select.

3. Use the right arrow (>) key to scroll to the following display:

Select (1) < >

Erase Data

4. Press [1] or [

]. All data pertaining to the access code, except the

access code name, will be erased.

To delete the access code name from an existing code, perform the

following:

1. Enter [

][5] followed by a Master code.

2. Locate the code using one of the code-searching methods (see Section

2.2 “Modifying an Existing Code”). Press [

] to select.

3. Use the right arrow (>) key to scroll to the to “Select (2) Edit User

Name” and press [

4. The display will indicate the current name. Press [

5. The display will read “Select (0) Clear Display.” Press [

]. The access

code name will be erased.

6. Follow the instructions outlined in Section 2.1 to program a new

label, or press [#] until you have exited access code programming.

2.6 Special Codes

The following are special codes. Selecting the corresponding user option

will program each code (see Section 2.3 “Change User Code Options”).

System Master Codes

System Master codes have access to all partitions on the system. These

codes can be used to program other access codes, except for other System

Master codes. For a list of the other user options that are enabled for this

code, see Table 2-1.

Supervisor Codes

The supervisor code can be used to program other access codes that are

only to be active on the supervisor’s partition. Users with Supervisor codes

cannot program other Supervisor codes, or System Master codes. For a list

of the other user options that are enabled for this code, see Table 2-1.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

DSC MAXSYS PC4020 Bedienerhandbuch Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein DSC MAXSYS PC4020