search

DSC MAXSYS PC4020 Bedienerhandbuch Seite 20

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 40
  • Inhaltsverzeichnis
  • LESEZEICHEN
    • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 19
18
Section 3: System Administration
NOTE: To enter the [
*
][6] menu, you may need to enter an access
code that has the “System Master” or “Supervisor” option enabled.
3.1 Turning on Quick Arm
Keypad Command: [
*
][6][Access or Master Code][0][0]
This option will allow users to arm the system by entering [*] [0] at any
keypad, instead of entering an access code. To turn this feature on, perform
the following:
1. Press [
*
] [6] [access or master code].
2. Use the arrow keys (< >) to scroll to the Toggle Options menu. Press
[0] or [
*
].
3. Use the arrow keys (<>) to scroll to the “Quick Arm” display. To
change the Quick Arm setting, press [0] or [
*
].
4. To exit the menu, press [#].
3.2 Turning on Quick Exit
Keypad Command: [*][6][access or master code][0][1]
This option will allow a user to exit an armed system through a designated
entry/exit point by entering [*] [0] at a keypad. The system gives the user
2 minutes to exit the premises. Once the user has exited the premises, the
system will continue to be armed. This option must also be enabled in
order for the Exit function key to work.
1. Press [*] [6] [access or master code].
2. Use the arrow keys (<>) to scroll to the Toggle Options menu. Press
[0] or [
*
].
3. Use the arrow keys (<>) to scroll to the “Quick Exit” display. To
change the Quick Exit setting, press [1] or [
*
].
4. To exit the menu, press [#].
3.3 Controlling Automatic Arming
Daily Auto-arming
Keypad Command: [
*
][6][access or master code][2]
This option will allow the system to be automatically armed at the same
time each day. In order for this function to work, you must both enable
the Auto-Arm function, and program the Auto-Arm Time (follow the steps
below).
To enable auto-arming at the same time each day, perform the following:
1. Press [
*
] [6] [access or master code].
2. Use the arrow keys (<>) to scroll to the Auto-Arm Control menu.
Press [2] or [
*
].
3. Use the arrow keys (<>) to scroll to the “Auto Arm” display. To change
the Auto Arm setting, press [0] or [
*
].
Seitenansicht 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare
Verwandte Produkte und Handbücher für Nein DSC MAXSYS PC4020
Nein DSC PC4020 - V3.3 Bedienungsanleitung   (64 Seiten)
Nein DSC PC-1864 - REV2 Bedienungsanleitung   (11 Seiten)
Nein DSC PowerSeries PC1832 Bedienungsanleitung   (28 Seiten)
Nein DSC MAXSYS PC4020 Bedienungsanleitung   (39 Seiten)
Nein DSC Classic PC 1555 Bedienungsanleitung   (20 Seiten)
  • CONCORD Frost King Elcomax Assa WizCom Technologies
  • QSC Musikinstrumentenverstärker Sharp Minidisc-Spieler Sharp Dockingstationen für mobile Geräte Pfaff Nähmaschinen Blusens Tablets
  • Electrolux EWG127410W Kodak MAX Z990 Liebherr CU 2811-20 Casio fx-CG50 Cadco LKR-220
  • Philips FWM185/12 Bedienungsanleitung Pyle PDWM4700 Datenblatt ViewSonic VS13647 Betriebsanweisung Samsung CLX-9251NA Bedienungsanleitung