DSC MAXSYS PC4020 Bedienerhandbuch PDF herunterladen (Seite 6)

Section 1: General System

Operation

1.1 Getting to Know Your System

Your security system is made up of a control panel, one or more keypads

and various detectors and sensors. The control panel will be mounted

out of the way in a utility room or basement. The metal control cabinet

contains the system’s electronics and stand-by battery. There is normally

no reason for anyone except an installer or service person to have access

to the control panel.

The keypads each have an audible indicator, an alphanumeric liquid

crystal display (LCD), status lights and command entry keys. The keypad

is used to send commands to the system and to display the current system

status. Each keypad will be mounted in convenient locations inside the

protected premises, near designated points of entry/exit.

Zones and Partitions

The protected premises has been divided by your installer into zones and

partitions. A zone is an area of protection that has one or more detection

sensors connected to it (motion detectors, glassbreak detectors, door

contacts or shock sensors). A single zone might be a room, a hallway or a

door or window. Two or more of these zones will be linked together by

the control panel to form a partition.

A partition is a region of the protected premises. A partition can be armed

and disarmed independently from other partitions. All of the partitions

together form the entire system.

Some zones will belong to more than one partition, such as points of entry/

exit and hallways. These are called

global zones global zones

global zones because they are not

assigned to a single partition.

Access Codes

As a user of the system, you will be assigned a 4- or 6-digit access code.

Access codes are used to arm and disarm the partition(s) to which they

are assigned. Some access codes can perform additional system functions,

such as programming system options and bypassing zones.

Your access code may not allow you to access certain system functions.For

instance, if your code is only allowed to arm and disarm Partition 1, you

will not be able to arm or disarm other partitions, or the entire system.

1 2 3 4 5 6 7 8 9 10 11 ... 39 40

Keine Kommentare

DSC MAXSYS PC4020 Bedienerhandbuch Seite 6