DSC Power832 PC5O15 Installationshandbuch PDF herunterladen (Seite 19)

K E Y P A D C O M M A N D S

[

✱✱

✱] [5] Programming Access Codes

All 37 access codes are programmed in this section. For instructions on programming access codes, see the

PC5015 Instruction Manual (“Programming Access Codes”).

[

✱✱

✱] [6] User Functions

To program user functions, perform the following:

1. Press [✱] [6] [Master Code]. The keypad will flash the ‘Program’ light.

2. Press the number [1] to [5] for the item to be programmed.

••

•

[1] - Time and Date[1] - Time and Date

[1] - Time and Date

See the PC5015 Instruction Manual for instructions on setting the time and date (“Setting the Time and Date”).

••

•

[2] - Auto-Arm Enable/Disable[2] - Auto-Arm Enable/Disable

[2] - Auto-Arm Enable/Disable

Enter [

✱] [6] [2] to enable (three keypad beeps) or disable (one long beep) the auto-arm feature.

••

•

[3] - Auto-Arm Schedule[3] - Auto-Arm Schedule

[3] - Auto-Arm Schedule

Enter [✱][6][3] to change the auto-arm time for each day of the week.

Scroll to the day of the week you want to change, or enter the number of the day (1-7 for Sunday to Saturday).

On an LED keypad zone lights 1-7 will represent Sunday to Saturday.

When you have selected a day, enter the auto-arm time in 24-hour format (i.e. enter a 4-digit number in

[hhmm] format).

The system will return you to the day selection menu. Scroll to the next day you want to program, or to exit

auto-arm programming, press [#].

Only LCD5500 v2.0 or gr Only LCD5500 v2.0 or gr

Only LCD5500 v2.0 or gr

eater keypads supporeater keypads suppor

eater keypads suppor

t the [t the [

t the [

✱

][6][3] menu option.][6][3] menu option.

][6][3] menu option.

••

•

[4] - System Test[4] - System Test

[4] - System Test

When [4] is pressed the panel will perform the following. For step-by-step instructions on performing a system

test, see the PC5015 Instruction Manual (“Full System Test”):

- sound the alarm output for two seconds

- light all lights on the keypad

- sound the keypad buzzer for two seconds

- test the main panel/ PC5204 battery

- send a System Test Reporting code, if programmed

(See Section 5.7 “Communicator - Reporting Codes”)

••

•

[5] - Enable DLS (Downloading)[5] - Enable DLS (Downloading)

[5] - Enable DLS (Downloading)

When [5] is pressed the panel will turn on the downloading option for 6 hours. During this time the panel will

answer incoming downloading calls

(See Section 5.8 “Downloading”)

••

•

[6] – User Initiated Call-Up[6] – User Initiated Call-Up

[6] – User Initiated Call-Up

When [6] is pressed, the panel will initiate a call to the downloading computer.

LCD Keypad User Functions

Additional features are available using on the LCD keypad. These features do not have numbers assigned. Use

the arrow keys (< >) to scroll through the [

✱] [6] menu and press the [✱] key to select the following commands.

•

View Event BufferView Event Buffer

View Event Buffer: The 128 Event Buffer can be viewed through any LCD keypad

(See Section 5.16.1 “Viewing the

Event Buffer Through the LCD Keypad”)

•

Brightness ControlBrightness Control

Brightness Control: When this option is selected the keypad will allow you to scroll through 10 different backlight

level options. Use the arrow keys (<>) to scroll to the desired backlight level and press the [#] key to exit.

•

Contrast ControlContrast Control

Contrast Control: When this option is selected the keypad will allow you to scroll through 10 different contrast level

options. Use the arrow keys (<>) to scroll to the desired contrast level and press the [#] key to exit.

•

Keypad Buzzer ControlKeypad Buzzer Control

Keypad Buzzer Control: When this option is selected the keypad will allow you to scroll through 21 different

keypad sounder tone options. Use the arrow keys (<>) to scroll to the desired keypad beeper level and press the

[#] key to exit. This function can be achieved on LED keypads by holding the [✱] key.

[

✱✱

✱]

[7] Command Output Functions

There are four output functions available to the user. Entering [✱]

[7] [1-4] [Access Code, if required] will activate

any output programmed for options [19]-[22] (respectively). Each function can be performed when the system is

either armed or disarmed. For more information regarding these output types, see Section 5.10 “PGM Output

Options.”

[

✱✱

✱] [8] Installer Programming

Enter [✱][8] followed by the Installer Code to enter Installer Programming

(See Section 4.0 “How to Program”).

[

✱✱

✱] [9] Arming Without Entry Delay

When a Partition is armed with the [✱][9] command the panel will remove the entry delay from the partition. After

the exit delay, Delay 1 and Delay 2 type zones will be instant and Stay/Away zones will remain bypassed.

(See

Section 5.1 “Zone Definitions”).

For more information regarding this feature, see the PC5015 Instruction Manual (“Alternate Arming Methods –

Arming Without Entry Delay”).

The entry delay can be activated/deactivated at any time while the system is armed by pressing [✱][9].

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

DSC Power832 PC5O15 Installationshandbuch Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme DSC Power832 PC5O15