DSC Power832 PC5O15 Installationshandbuch PDF herunterladen (Seite 32)

P R O G R A M D E S C R I P T I O N S

29

The time to complete a successful download can be significantly reduced with the use of the PC-Link. This adaptor

makes it possible to perform on-site downloading. To Initiate Local Downloading via the PC-Link, enter [

✱] [8]

[Installer’s Code] [499] [Installer’s Code] [499]. All keypads will be busy for the duration of the PC-Link connection. The

status LEDs will display the current system status on the keypad where the PC-Link was initiated. For more information

on connecting the PC-Link, refer to your “PC-Link Download Kit Instruction Sheet”.

Downloading can also be performed through the LINKS1000 cellular communicator if the phone line is

disconnected. If using the LINKS1000 with Call Back, you need to program the LINKS1000 Preamble with the

downloading phone number in order for the panel to call the computer correctly.

When downloading labels for LCD keypads, only the LCD keypad assigned to addrWhen downloading labels for LCD keypads, only the LCD keypad assigned to addr

When downloading labels for LCD keypads, only the LCD keypad assigned to addr

ess 8 will ress 8 will r

ess 8 will r

eceive theeceive the

eceive the

labels.labels.

labels.

In addition, version 1.0 and version2.0 LCD keypads In addition, version 1.0 and version2.0 LCD keypads

In addition, version 1.0 and version2.0 LCD keypads

arar

ar

e not compatible on the same system.e not compatible on the same system.

e not compatible on the same system.

For morFor mor

For mor

e infore infor

e infor

mation rmation r

mation r

efer to the Download Manual included with the computer softwarefer to the Download Manual included with the computer softwar

efer to the Download Manual included with the computer softwar

e.e.

e.

Answering Machine /Double Call ........................... Section [401], Option [1]

User Enable DLS Window ...................................... Section [401], Option [2]

Call Back ................................................................. Section [401], Option [3]

User Initiated Call-up .............................................. Section [401], Option [4]

Answering Machine Double Call Timer .................. Section [405]

Download Computer Telephone Number ............... Section [402]

Download Access Code ......................................... Section [403]

Panel Identifier ........................................................ Section [404]

LINKS1000 Preamble (Downloading) .................... Section [490]

One-time 1-hour user enabled DLS window ......... Section [701], Option [7]

5.9 Partitions / Zone Assignment

A partition is a defined area which will operate independent of another area of the system. The panel can be

divided into two partitions. For example, in an office/warehouse installation it may be necessary to limit

warehouse employees from accessing the office and office employees from accessing the warehouse.

Any zone can be assigned to either, or both partitions. Any Access Code can be assigned to work on either, or

both partitions

(See Section 3.4 “[

✱

] Commands, [

✱

][5] Programming Access Codes”).

Global Zones

are zones assigned to both partitions. A common zone will only be armed when both partitions

are armed and will be disarmed when either partition is disarmed.

Keypads can be assigned to work on either partition or can be assigned for Global operation

(See Section 2.6

“Keypad Assignment”).

Each partition can be programmed to report using a different Account Number

(See Section 5.5 “Communicator

- Account Numbers”).

Some of the Programmable Output options are also selectable by Partition

(See Section 5.10 “PGM Outputs”).

The Partition 2 Enable option must be programmed before Partition 2 will operate.

At default zones 1 through 8 are assigned to Partition 1. If additional zones are being used or the application

requires two Partitions zones must be enabled to operate on the correct Partition.

Zones prZones pr

Zones pr

ogrammed as Null must be rogrammed as Null must be r

ogrammed as Null must be r

emoved fremoved fr

emoved fr

om both Parom both Par

om both Par

titions (See Section 5.1 “Zone Definition).titions (See Section 5.1 “Zone Definition).

titions (See Section 5.1 “Zone Definition).

Partition 2 is Enabled ............................................. Section [201], Option [1]

Partition 1 Zone Assignments ................................ Section [202] to [205]

Partition 2 Zone Assignments ................................ Section [206] to [209]

5.10 Programmable Outputs

Programmable outputs are available on the following devices:

• PGM1 and PGM2 on the PC5015 main board

• 8 low current outputs available with the PC5208 Output Module

• 4 high current outputs available with the PC5204 Power Supply/Output Module

Programming any of the outputs is a two step process. First an option from the list below must be selected for

the PGM Output. Second, the output attributes must be selected. The following is a list of the programmable

output options and attributes.

5.10.1 Programmable Output Options

[01] Burglary and Fire Bell Output The output will activate when the alarm output is active and will turn off

when the alarm output is silenced. If the alarm output is pulsing the PGM output will pulse as well. This output

will follow the activation of the alarm output (pre-alert) for delayed fire zones.

[02] For Future Use

[03] Sensor Reset ([✱] [7] [2])

This output will norThis output will nor

This output will nor

mally be active (switched to grmally be active (switched to gr

mally be active (switched to gr

ound).ound).

ound).

This option is used to reset power for latching smoke detectors. The output will deactivate for five seconds when

the [

✱] [7] [2] command is entered (see Section 3.4 “[✱] [7] Output Functions”). The keypad buzzer will not

sound for the five second period.

DSC Power832 PC5O15 Installationshandbuch Seite 32

Kommentare zu diesen Handbüchern

DSC Power832 PC5O15 Installationshandbuch Seite 32

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme DSC Power832 PC5O15