DSC Power832 PC5O15 Installationshandbuch PDF herunterladen (Seite 31)

P R O G R A M D E S C R I P T I O N S

on the Bell Output of the main panel. The Bell Circuit Trouble Restoral Reporting Code will be transmitted as

soon as the problem is corrected.

A Fire Trouble Alarm Reporting Code will be transmitted immediately when an open condition is measured on any

Fire type zone

(See Section 5.1 “Zone Definitions”).

The Fire Trouble Restoral Reporting Code will be transmitted as

soon as the problem is corrected.

The Auxiliary Power Supply Trouble Alarm Reporting Code will be transmitted if the AUX output is shorted.

The AUX output control incorporates a fuseless design. When excessive current is drawn the panel will

automatically shut off the output. The panel will constantly check the AUX output and when the excessive

current draw is removed the panel will reset the output and transmit an Auxiliary Power Supply Trouble

Restoral Reporting Code.

A TLM Trouble Reporting Code can only be transmitted if an Alternate Communicator is being used

(See

Section 5.26 “LINKS1000 Cellular Communicator”)

. The panel will only transmit the signal after the time

programmed for the TLM Trouble Delay. The TLM Restoral Reporting Code will be transmitted immediately

once the trouble is restored.

A General System Trouble Reporting Code will be transmitted if the panel detects any of the following on the

PC5204 Power Supply/Output Module: AC Power Failure, Low Battery, AUX Output Trouble, Output #1

Supervisory trouble. The General System Trouble Restoral Reporting Code will be transmitted when all of the

listed problems are corrected.

A General System Supervisory Trouble Reporting Code will be transmitted if any module goes missing from

the Keybus. If the module is a zone expander the panel will also transmit the Zone Expander Supervisory

Alarm Trouble Reporting Code. The panel will send a General System Supervisory Restoral Reporting Code

when the problem is corrected as well as a Zone Expander Supervisory Restoral Reporting Code if the

module is a zone expander.

5.7.6 Zone Restorals

If the Restoral on Bell Time-out option is selected, the panel will send the Zone Restoral Reporting Code for

the zone if the bell cut-off time has expired

and

the zone is secured. If the zone is not secured when the bell cut-

off time expires, the panel will send the restoral immediately once the zone is secured, or when the system is

disarmed. If the Restoral on Bell Time-out option is not selected, the panel will immediately send the Zone

Restoral Reporting Code when the zone is secured, regardless of whether or not the alarm output is active.

24 Hour type zones will r24 Hour type zones will r

24 Hour type zones will r

eporepor

epor

t the rt the r

t the r

estoral immediately when the zone is securestoral immediately when the zone is secur

estoral immediately when the zone is secur

ed.ed.

ed.

Restoral on Bell Time-out ....................................... Section [380], option [2]

AC Failure Communication Delay Time ................. Section [370]

5.8 Downloading

Downloading allows programming of the entire control panel via a computer, modem and telephone line. All

functions and features, changes and status, such as trouble conditions and open zones can be viewed or

programmed by downloading.

When power is applied to the panel, a 6 hour downloading window can be enabled. This will allow youWhen power is applied to the panel, a 6 hour downloading window can be enabled. This will allow you

When power is applied to the panel, a 6 hour downloading window can be enabled. This will allow you

to perto per

to per

forfor

for

m downloading without having to do any keypad prm downloading without having to do any keypad pr

m downloading without having to do any keypad pr

ogramming.ogramming.

ogramming.

If the Answering Machine/ Double Call option is enabled (or during the first 6 hours after power up) the panel

will answer incoming calls for downloading provided the following conditions occur:

1. The panel hears one or two rings then misses a ring.

2. At this point the panel will start a timer.

3. If the panel hears another ring before the Answering Machine Double Call Timer

expires it will answer on

the first ring of the second call.

The panel will immediately go on line and begin the download process unless the Call Back option is enabled. If

enabled, the panel and computer will both hang up. The panel will then call the Download Computer Telephone

Number and wait for the computer to answer. Once the computer answers downloading will begin.

If the User Enabled DLS Window option is ON, the user can activate the downloading feature for a set period of

time by entering [

✱] [6] [Master Code] [5].

If the Full 6-hour User Enabled DLS Window option is enabled, when the user opens the DLS window with

[✱][6][Master code][5], the DLS window will remain open for six hours. The DLS window will remain open after a

successful hang-up from a downloading call. If the One Time 1-hour User Enabled DLS Window option is

enabled, when the user opens the DLS window with [✱][6][Master code][5], the DLS window will stay open for

one hour, and will close after a successful hang-up from a downloading call.

After six hours upon power up, the panel will not answer incoming calls unless the Answering Machine/Double

Call option is enabled, or the Number of Rings is programmed to be more than [0].

If the User Initiated Call-Up option is enabled, the user can have the panel initiate a call to the downloading

computer by pressing [✱][6][Master Code][6].

The Download Access Code

and Panel Identifier Code

are for security and proper identification. Both the panel

and the computer file should have the same information programmed before attempting to download.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

DSC Power832 PC5O15 Installationshandbuch Seite 31

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme DSC Power832 PC5O15