DSC MAXSYS PC4020 Bedienerhandbuch PDF herunterladen (Seite 16)

Select (1) for

User Name Search

Press [1] or [

3. The first letter of the access code name using the corresponding

number key. For example, for John, enter the letter “J” by pressing

the [4] key once.

4. The keypad will display the first available name starting with the

selected letter. Use the right arrow (>) key to scroll through

subsequent names.

5. Once the appropriate user name is displayed, press [

] to continue

programming.

Once the code has been selected, the Program Code menu will be shown.

Reprogram the access code, code label or partition access using the steps

outlined in Section 2.1 “Program a New Code”.

2.3 Changing User Code Options

User code options determine which system features the code will be able

to access. Table 2-1 shows all of the available access code options. The

table also indicates which options are enabled by default for each type of

code.

To change the user options for a code from its default settings, perform

the following:

1. Enter [

][5] followed by a Master code.

2. Locate the code using one of the code searching methods (see Section

2.2). Press [

] to select.

3. Use the right arrow (>) key to scroll to the following display:

Select (5) < >

Edit User Opt’s

Press [5] or [

4. Use the arrow (< >) keys to scroll through each option. Press [

] to

turn each option on (Y) or off (N).

5. When the desired options have been programmed, press [#].

2.4 Access Code Label Options

In Section 2.1, you learned how to program the access code label (“Program

User Name”). There are other options available when programming labels.

When programming the label, press the [

] key for the options menu. Use

the arrow (< >) keys to scroll through each option. Press the [

] key to select.

The available options are:

••

•

Clear Display: Clear Display:

Clear Display: Selecting this option will clear the entire code label.

••

•

Clear to End: Clear to End:

Clear to End: This will clear the display from the character where

the cursor was located to the end of the display.

••

•

Change CaseChange Case

Change Case: This will toggle the letter entry between uppercase

and lowercase letters.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

DSC MAXSYS PC4020 Bedienerhandbuch Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein DSC MAXSYS PC4020