DSC MAXSYS PC4020 Bedienerhandbuch PDF herunterladen (Seite 21)

Section 3: System Administration

4. To exit the menu, press [#].

5. Use the arrow keys (<>) to scroll to the “Auto Arm Time” display.

Press [2] or [

]. This is the time at which the partition will

automatically arm itself every day.

6. Enter the time using the 24 hour format (HHMM). The keypad will

return to the Auto-Arm Control menu.

Scheduled Auto-arming

The panel can also be programmed to automatically arm according to a

schedule. Schedules can only be programmed by your installer. If you

want more information regarding scheduling and your security system,

please consult your installer.

NOTE: Auto-arm must be enabled for Scheduled Auto-arming to work.

To enable auto-arming according to a schedule:

1. Press [

] [6] [access or master code].

2. Use the arrow keys (<>) to scroll to the Auto-Arm Control menu.

Press [2] or [

3. Use the arrow keys (<>) to scroll to the “Auto Arm” display. To change

the Auto Arm setting, press [0] or [

]. To exit, press [#].

4. Use the arrow keys (<>) to scroll to “Schedule Arm.” To change the

Schedule Arm setting, press [1] or [

]. This option, when enabled,

will program the partition to automatically arm according to a

schedule programmed by your installer. To exit, press [#].

5. Use the arrow keys (<>) to scroll to “Sched. Disarm.” To change the

“Sched. Disarm”setting, press [3] or [

]. When this option is enabled,

the partition will follow the auto disarming schedule programmed

by your installer. To exit, press [#].

When Auto Arming Occurs

At the selected auto arm time, the keypad will beep once every 10 seconds

to alert anyone on the premises that the system is about to arm. The bell

or siren may also sound every 10 seconds, if programmed by your installer.

To prevent the system from auto arming, press any key on the partition

keypad during this pre-alert period. If desired, your installer can program

the system so that a valid access code will be required to prevent the

system from auto arming. Swiping an access card on one of the partition’s

readers—if installed—will also prevent auto arming.

3.4 Setting the Time and Date

Keypad Command: [Master Code][9]

To set the time and date on the system, perform the following:

1. Enter a Master code and press [9].

2. Use the keypad arrow keys (< >) to scroll to the display “Set System

Time.” Press [

3. Enter the current time in 24 hour format (HHMM). For instance, to

program 3:51 p.m., type in “1551.”

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

DSC MAXSYS PC4020 Bedienerhandbuch Seite 21

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein DSC MAXSYS PC4020