DSC PC6010 Installationshandbuch Seite 22
- Seite / 52
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
20
These section options are relevant to the LINKS1000 operation.
NOTE: Dial Tone Search must be included in the land phone number. See ‘Main Item’ for programming details.
Phone Number 1. If the LINKS1000 module is enabled on the PC6010, this number will be used to back up
the land line first number should the telephone line fail.
Phone Number 2. If the LINKS1000 module is enabled on the PC6010, this number will be used to back up
the land line second number should the telephone line fail.
Phone Number 3. If the LINKS1000 module is enabled on the PC6010, this number will be used to back up
the land line third number should the telephone line fail.
This number is used if downloading is to be done or backed up with the LINKS1000 unit.
Enter the telephone number for the downloading computer if User Call Up, Periodic DLS, or DLS
Callback is enabled. See “PGM TEL NUMBER” for entering a telephone number and options when
programming the phone number. See the “Communicator Options” section of this manual for
instructions on programming telephone numbers.
This section contains all options related to the use of the LINKS1000 module.
LINKS module enabled?
YES = The LINKS1000 module enabled. This selection must be enabled in order for the LINKS1000 unit to
operate.
NO = LINKS1000 module disabled.
NOTE: Once the LINKS1000 module is selected the Main PGM OUT automatically changes to Links
Operation and cannot be reprogrammed until the module is deactivated.
LINKS periodic test transmission?
YES = A test transmission is sent by the panel for the LINKS1000 unit. (See ‘Tx Cycle Days’ and ‘Tx Cycle
Time’.)
NO = No test transmission is sent by the panel for the LINKS1000 unit.
NOTE: The Links Test Transmission Code can be programmed under system maintenance of the
reporting code section.
Test transmission cycle days?
Enter the number of days between test code communications. Valid entries are from 001 to 255. The
default setting is 030.
Test transmission cycle time?
Enter the time of day the test code will be communicated. Times are entered using 24Hr format HH:MM.
The default setting is 0000.
Links Module
LINKS MODULELINKS MODULE
LINKS MODULELINKS MODULE
LINKS MODULE
(4)(4)
(4)(4)
(4)
1ST NUMBER1ST NUMBER
1ST NUMBER1ST NUMBER
1ST NUMBER
(0)(0)
(0)(0)
(0)
2ND NUMBER2ND NUMBER
2ND NUMBER2ND NUMBER
2ND NUMBER
(1)(1)
(1)(1)
(1)
3RD NUMBER3RD NUMBER
3RD NUMBER3RD NUMBER
3RD NUMBER
(2)(2)
(2)(2)
(2)
DLS NUMBERDLS NUMBER
DLS NUMBERDLS NUMBER
DLS NUMBER
(3)(3)
(3)(3)
(3)
LINKS TOGGLESLINKS TOGGLES
LINKS TOGGLESLINKS TOGGLES
LINKS TOGGLES
(4)(4)
(4)(4)
(4)
LINKS MODULELINKS MODULE
LINKS MODULELINKS MODULE
LINKS MODULE
NN
NN
N
PERIODIC TXPERIODIC TX
PERIODIC TXPERIODIC TX
PERIODIC TX
NN
NN
N
TX CYCLE DAYSTX CYCLE DAYS
TX CYCLE DAYSTX CYCLE DAYS
TX CYCLE DAYS
(5)(5)
(5)(5)
(5)
TX CYCLE TIMETX CYCLE TIME
TX CYCLE TIMETX CYCLE TIME
TX CYCLE TIME
(6)(6)
(6)(6)
(6)
SYSTEM AREASYSTEM AREA
SYSTEM AREASYSTEM AREA
SYSTEM AREA
LINKS MODULELINKS MODULE
LINKS MODULELINKS MODULE
LINKS MODULE
- Programming Manual 1
- Introduction 3
- Main Programming Sections 4
- Installer Options 5
- System Options 6
- Keypad Lockout Options 7
- System Times 7
- Arm/Disarm Mask 8
- Zone Supervision 8
- Download Section 9
- Other DLS Programming 10
- Communicator Section 11
- SIA 1986 Format 12
- Contact ID 12
- Communicator Toggles 14
- Communicator Miscellaneous 16
- Test Code Transmission 16
- Reporting Codes 17
- Links Module 22
- Switched Auxiliary Output 23
- Main Bell Output 23
- PGM Outputs 24
- PGM Pulse Times 25
- Programmable Output Options 26
- Event Scheduling 30
- PC6820 Options 35
- Area Section 39
- Area Times 40
- Zone Assignment 41
- Zone Type 42
- Zone Options 44
- Alarm and Seismic Groups 45
- Area Label 45
- Delete/Copy Area 45
- Backbone Section 46
- Module Hardware 47
- Event Buffer 48
- Diagnostics 48
- Appendix A 49
- Appendix B 50
- Table 2: 51
- Zone Reporting Codes 51
- Toronto, Canada 52
Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme DSC PC6010
(56 Seiten)
(16 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 2.429 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern