DSC PC6010 Installationshandbuch PDF herunterladen (Seite 24)

SYSTEM AREASYSTEM AREA

SYSTEM AREA

PGM OUTPUTSPGM OUTPUTS

PGM OUTPUTS

Main PGM1 and PGM2 Outputs

The PGM outputs can be programmed to activate for any one of the 56 options listed in the PGM

outputs list. Normally the outputs energize when they are activated. The outputs will de-energize when

they are activated if any “INV” options are selected. The default output type is 25 (Holdup).

Program the output type from the list of 56 output options (see “Programmable Output Options’).

Depending on which output option you select, you may also need to program the area(s) the output will

be active on, the zone the output will follow, the date schedule the output will follow, and/or a pulse

timer for the output. The default output type is 25 (Holdup).

NOTE: Refer to “Programmable Output Options” for a list of the available options.

PC6204 Options

Each relay of any 4204 relay module can be programmed to activate for any one of the 56 options listed

in the PGM outputs list. Normally each relay will be de-energized, and energizes when it is activated. The

relay will normally be energized, and then de-energized when it is activated, if any “INV” option is

selected. Output 1 will always be active if left at the default of (15) Combus power, unless there is no

incoming Combus power.

Program the output type from the list of 56 output options (see “Programmable Output Options”).

Depending on which output option you select, you may also need to program the area(s) the output will

be active on, the zone the output will follow, the date schedule the output will follow, and/or a pulse

timer for the output.

NOTE: PC6202 #01 Output #1 is default a “Burg Only” (02) output. Do not use this output to

repower Combus without changing the output type to “Combus Power” (15).

PC6216 Options

A maximum of nine PC6216 output modules can be connected to the system.

First select the PC6216 to be programmed, then select the option it is going to be programmed for. The

PC6216 follow one of nine custom PGM output groups.

The custom group allows each of the 16 outputs to be individually programmed with one of the 56

options listed in the PGM outputs list. Each output is programmed in the “4216 CUSTOM” section.

PC6216 Custom

This section is for programming each of the 9 custom groups for different options. Program one option

for each of the 16 outputs. You can program each output for any of the 56 listed programmable output

options. You can assign each PC6216 modules to one of these groups (see “PC6216 Options”).

Depending on which output option you select, you may also need to program the area(s) the output will

be active on, the zone the output will follow, the date schedule the output will follow, and/or a pulse

timer for the output.

PGM OUTPUTSPGM OUTPUTS

PGM OUTPUTS

(06)(06)

(06)

MAIN PGM1 OUTMAIN PGM1 OUT

MAIN PGM1 OUT

(0)(0)

(0)

CUSTOM GROUPCUSTOM GROUP

CUSTOM GROUP

(01) (01)

(01)

(09) (09)

(09)

6216 OPTIONS6216 OPTIONS

6216 OPTIONS

(3)(3)

(3)

6204 OPTIONS6204 OPTIONS

6204 OPTIONS

(2)(2)

(2)

PGM Outputs

MAIN PGM2 OUTMAIN PGM2 OUT

MAIN PGM2 OUT

(1)(1)

(1)

CUSTOM GROUPCUSTOM GROUP

CUSTOM GROUP

(01) (01)

(01)

(09) (09)

(09)

6216 CUSTOM6216 CUSTOM

6216 CUSTOM

(4)(4)

(4)

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

DSC PC6010 Installationshandbuch Seite 24

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme DSC PC6010