DSC PC6010 Installationshandbuch PDF herunterladen (Seite 26)

The output will activate when any fire or zone alarm occurs on any of the selected areas.

The output will deactivate when any fire or zone alarm occurs on any of the selected areas.

The output will activate when any zone alarm occurs on any of the selected areas.

The output will deactivate when any zone alarm occurs on any of the selected areas.

The output will activate when any fire alarm occurs on any of the selected areas.

The output will deactivate when any fire alarm occurs on any of the selected areas.

The output will activate when a user answers YES to “Do you want to activate door strike?” at any keypad

in any of the selected areas.

NOTE: This output will follow the “Utility/Sensor” PGM pulse time.

The output will deactivate when a user answers YES to “Do you want to reset detectors?” at any keypad in

any of the selected areas.

NOTE: This output will follow the “Utility/Sensor” PGM pulse time.

The output will activate when any of the selected areas are armed.

The output will activate when any alarm occurs on any of the selected areas. The output will stay activated

until the area that caused the alarm is disarmed. The following alarms DO NOT activate the latched strobe

output: Standard Fire Zone Alarm, Auto-Verify Zone Alarm.

The output will activate when a trouble condition is present on any of the selected areas.

If a system trouble occurs (i.e. loss of time, TLM) all trouble outputs will activate.

The output will activate during exit and entry delay on any of the selected areas.

The output will activate when door chime is activated on any of the selected areas, and deactivate when

the chime pulse timer expires. (See “Chime Pulse” under “PGM Pulse Times”.)

The door chime activates when a zone is opened and activates again when a zone is closed. For the door

chime feature to work, the user must enable the door chime, and the installer must enable the door chime

for the individual zones (see “Chime Function” under “Zone Options”).

The output will activate when a telephone line trouble is present.

The output will activate when a Failure to Communicate Trouble is present. The output will stay activated

until the trouble is cleared by the user, or until a successful communication is sent to the central station.

This output will remain active at all times unless a system reset is ordered by the main panel.

The output will activate when all the zones in the area are closed, and the area is disarmed. If a zone

opens or the area is armed, the output will deactivate.

This output will annunciate when a selected zone has gone into alarm.

Any one of the 256 zones can be selected. If the zone is armed and goes into alarm, the output will

activate and remain active, even when the area the zone belongs to has been disarmed. The output will

remain active until the alarm is cleared.

SYSTEM AREASYSTEM AREA

SYSTEM AREA

PGM OUTPUTSPGM OUTPUTS

PGM OUTPUTS

FIRE AND BURGFIRE AND BURG

FIRE AND BURG

(00)(00)

(00)

INV FIRE/BURGINV FIRE/BURG

INV FIRE/BURG

(01)(01)

(01)

BURG ONLYBURG ONLY

BURG ONLY

(02)(02)

(02)

INV BURG ONLYINV BURG ONLY

INV BURG ONLY

(03)(03)

(03)

FIRE ONLYFIRE ONLY

FIRE ONLY

(04)(04)

(04)

INV FIRE ONLYINV FIRE ONLY

INV FIRE ONLY

(05)(05)

(05)

UTILITY OUTPUTUTILITY OUTPUT

UTILITY OUTPUT

(06)(06)

(06)

SENSOR RESETSENSOR RESET

SENSOR RESET

(07)(07)

(07)

AREA STATUSAREA STATUS

AREA STATUS

(08)(08)

(08)

LATCHED STROBELATCHED STROBE

LATCHED STROBE

(09)(09)

(09)

TROUBLE OUTPUTTROUBLE OUTPUT

TROUBLE OUTPUT

(10)(10)

(10)

COURTESY PULSECOURTESY PULSE

COURTESY PULSE

(11)(11)

(11)

CHIME FOLLOWERCHIME FOLLOWER

CHIME FOLLOWER

(12)(12)

(12)

TLM ONLYTLM ONLY

TLM ONLY

(13)(13)

(13)

Programmable Output Options

FAILURE TO COMMFAILURE TO COMM

FAILURE TO COMM

(14)(14)

(14)

COMBUS POWERCOMBUS POWER

COMBUS POWER

(15)(15)

(15)

READY STATUSREADY STATUS

READY STATUS

(16)(16)

(16)

ZONE ALARMZONE ALARM

ZONE ALARM

(17)(17)

(17)

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

DSC PC6010 Installationshandbuch Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme DSC PC6010