DSC PC6010 Installationshandbuch PDF herunterladen (Seite 42)

AREA SECTIONAREA SECTION

AREA SECTION

ADAD

D/D/

EDIT AREA EDIT AREA

EDIT AREA

ZONE TYPEZONE TYPE

ZONE TYPE

Each zone can have its own unique label to help identify it on the LCD keypad. Upon first entering this

section, the LCD will display the current zone label.

NOTE: The maximum length of the zone label is 14 characters.

A cursor will appear under the first character of the label. Move the cursor to the left or right using the

[<][>] keys. Use the 1-9 number keys on the keypad to enter letters as follows:

[1] = A, B, C, 1 [2] = D, E, F, 2 [3] = G, H, I, 3 [4] = J, K, L, 4 [5] = M, N, O, 5

[6] = P, Q, R, 6 [7] = S, T, U, 7 [8] = V, W, X, 8 [9] = Y, Z, 9, 0 [0] = Space

For example, if you press the [4] key, the letter ‘J’ will appear above the cursor on the display. Press the [4]

key again, the letter ‘K’ will appear above the cursor. Press the [4] key a third time and the letter ‘L’ will

appear above the cursor. Press it again and the number ‘4’ will appear on the display. If a different key is

pressed, for example the [6] key, the cursor will automatically move to the right one space, and the letter

‘P’ will be displayed. To erase a character, move the cursor under the character using the [<][>] keys, and

press the [0] key.

While programming the zone label, press [*] to call up an options menu. To select an option, either press

the corresponding number key, or toggle through the options using the [<][>] keys, and press [*] to select.

[0] Clear Display [1] Clear to End [2] Change Case [3] ASCII Entry (See Appendix A)

[4] Save

[0] Clear Display will clear the entire zone label.

[1] Clear to End will clear the display from the character where the cursor was located to the end of the

display.

[2] Change Case will toggle the letter entry between upper case letters (ABC...) and lower case letters

(abc...).

[3] ASCII Entry is for entering uncommon characters. There are 255 characters, but 000 to 031 are not

used. Use the [<] [>] keys to toggle through the characters or enter a 3 digit number from 032 to 255.

Press the [*] key to enter the character into the zone label (see Appendix A for the ASCII characters chart).

[4] Save the label programmed and return to the previous menu.

Zone Type

Select the zone type for the selected zone. Upon entering this section, the current programmed zone type

is displayed.

For example, zone 001 will display ‘Standard Delay’ the first time it is programmed. All other zones (002

through 256) are instant zones by default.

Standard delay zones have an entry and exit delay. The exit delay starts as soon as the panel is armed. The

loop may be opened and closed during the delay time without causing an alarm. After the exit delay time

has expired, opening the loop will start the entry delay timer. During the entry delay time, the keypad will

sound steadily to advise the user that the system should be disarmed. If the panel is disarmed before the

entry time expires, no alarm will be generated. Program the entry and exit delay times in the Area Times

section.

This zone type is identical to the Standard Delay type zone with one exception - zones of this type can be

force armed (i.e. the system can be armed with this zone in an unrestored or open state). Force arming will

not be shown to the user. When the zone restores (closes), it will become armed with the rest of the area.

Once the zone is armed, an alarm will occur if it is violated again.

NOTE: Force arm delay zones will never cause a “Warning-Security Reduced” message.

The auxiliary delay zone operates the same way as the standard delay zone. However different entry/exit

times may be programmed. This is useful when a system has two delay zones, each requiring a different

entry/exit time. Program the auxiliary entry and exit delay times in the Area Times section.

If the zone is violated, it will activate instantly after the area is armed and the exit delay has expired.

The zone will follow the entry time of a delay zone. If no delay zone has been tripped the zone will activate

instantly. Zones of this type can be force armed (i.e. the system can be armed with this zone in an unrestored

or open state). Force arming will not be shown to the user. When the zone restores (closes), it will become

armed with the rest of the area. Once the zone is armed, an alarm will occur if it is violated again.

NOTE: Interior zones will never cause a “Warning-Security Reduced” message.

ZONE TYPEZONE TYPE

ZONE TYPE

(1)(1)

(1)

AUXILIARY DELAYAUXILIARY DELAY

AUXILIARY DELAY

(02)(02)

(02)

STANDARD DELAYSTANDARD DELAY

STANDARD DELAY

(00)(00)

(00)

INSTANTINSTANT

INSTANT

(03)(03)

(03)

ZONE LABELZONE LABEL

ZONE LABEL

(0)(0)

(0)

FORCE ARM DELAYFORCE ARM DELAY

FORCE ARM DELAY

(01)(01)

(01)

INTERIORINTERIOR

INTERIOR

(04)(04)

(04)

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

DSC PC6010 Installationshandbuch Seite 42

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme DSC PC6010